Crate & Barrel Tripod Table Assembly Instruction

TRIPOD TABLE

Thank you for purchasing the Tripod Table. This page
lists all the contents included in the box. Please take
time to identify the hardware as well as the individual
components of this product. As you unpack and
prepare for assembly, place the contents on a carpeted
or padded area to protect them from damage.

HARDWARE

7 - flat
washers

7 - spring
washers

Missing hardware?
Please call 800.606.6387 for replacements.

3 - wood
dowels

4 - small
bolts

7 - large
bolts

TOOLS REQUIRED

allen wrench

(included)

(We recommend the use of hand tools instead of power tools)

phillips head screwdriver

(not included)

CLEANING AND CARE

Clean surfaces with a dry or damp soft cloth. Do not
use abrasive cleaners. Do not use furniture wax or
polish as the unit is finished with a protective clear
lacquer. It is recommended to use coasters to protect
surface from heat and water.

COMPONENTS

1 - upright

1 - connecting
plate

3 - top
legs

1 - tabletop

ASSEMBLY

mounting
plate

3 - bottom
legs

tabletop

1 Place tabletop upside down onto a clean, padded
surface. Using a phillips head screwdriver, remove
mounting plate from tabletop as shown.

Made in Vietnam - r02 Page 1 of 3

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

TRIPOD TABLE

bracket

top leg

upright

2 Slide 3 top legs into brackets of upright as shown.
Make sure each leg securely engages upright.

NOTE: Do not over
tighten the bolts

mounting
plate

3 Attach mounting plate to upright and top legs with 7
flat washers, 7 spring washers and 7 large bolts as
shown, using a phillips head screwdriver. Do not over
tighten the bolts.

B

upright
assembly

bottom
leg

bracket

upright

A

tabletop

4 A) Place tabletop onto a clean, padded surface. Insert
3 wood dowels into tabletop as shown.
B) Fit wood dowels of tabletop into corresponding holes
of upright assembly. Secure tabletop to upright assembly
with 3 flat washers, 3 spring washers and 3 large bolts
using a screwdriver.

Made in Vietnam - r02 Page 2 of 3

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

5 Slide bottom legs into corresponding brackets of upright
as shown.