Crate & Barrel Triad Wine Tower Assembly Instruction

TRIAD WINE TOWER
ASSEMBLY HARDWARE
Thank you for purchasing the Triad Wine Tower. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage.
Note: 2 people are required to safely assemble this product.
COMPONENTS
8 - cams
4 - allen bolts
8 - cam screws
1 - pull 2 - wood
1 - phillips bolt
dowels
8 - screws
Missing hardware? Please call
800.606.6387 for replacements.
WALL MOUNTING HARDWARE
2 - large screws
2 - wall brackets
1 - wall straps
2 - plastic anchors
TOOLS REQUIRED
phillips head screwdriver
allen wrench (included)
(We recommend the use of hand tools instead of power tools)
2 - side panels
(1 left, 1 right)
4 - wine rack panels
1 - drawer right side
Made in China - r05
1 - top panel 1 - middle panel 1 - bottom panel
1 - fixed shelf 1 - tray (pull
1 - drawer left side
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
1 - drawer back
pre-attached)
1 - drawer front
1 - back panel
1 - drawer bottom
Page 1 of 5
TRIAD WINE TOWER
NOTE: Do not over tighten the cam screws
left and right side panels
1 Insert 4 cam screws into left and right side panels as shown. Secure, but do not over tighten, cam screws with a phillips head screwdriver.
NOTE: Make sure arrows on each cam point towards nearest edge with holes.
middle panel
bottom shelf
2 Insert 4 cams into middle panel and bottom panel as shown. Make sure arrows on each cam point towards nearest edge with holes.
fixed shelf
middle panel
right side panel
NOTE: Make sure groove of right side panel is assembled as shown
bottom panel
3 Fit dowels of fixed shelf, middle panel, and bottom panel into corresponding holes of left side panel as shown. Using a screwdriver, turn cams of middle and bottom panel clockwise until it securely engages each cam screw.
Made in China - r05
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
left side panel
B
B
back
A
panel
4 A) Slide back panel into corresponding grooves of middle and bottom panel as shown. B) Fit dowels of left side panel into corresponding holes of assembled unit. Secure all cams of middle and bottom panels.
Page 2 of 5
TRIAD WINE TOWER
BACK VIEW
OF TRAY
allen bolt
NOTE: Do not over tighten the bolts
top panel
5 Fit dowels of assembled unit into corresponding holes of top panel as shown. Secure top panel with 4 allen bolts, using an allen wrench. Do not over tighten the bolts.
NOTE: Do not over tighten the screws
right drawer drawer back
side
tray
90º
tray stopper
6 With the assistance of another adult, carefully position unit upright. Insert tray halfway into assembled unit as shown. Locate 2 tray stoppers on back of tray and turn each stopper 90º. At this point, fully insert tray into unit.
drawer front
drawer bottom
right drawer side
left drawer side
7 Attach left and right drawer side to drawer back with 4 screws as shown. Secure, but do not over tighten, screws with a screwdriver.
Made in China - r05
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
left drawer side
drawer back
8 A) Slide drawer bottom into corresponding grooves of drawer assembly as shown. B) Attach drawer front to drawer assembly with 4 screws as shown.
Page 3 of 5
TRIAD WINE TOWER
phillips bolt
pull
9 Attach pull to drawer front with 1 phillips bolt as shown. Secure bolt with an phillips head screwdriver.
wine rack panel
wood dowels
drawer assembly
10 Insert drawer assembly half-way into assembled unit and insert 1 wood dowel into each side. At this point, fully push drawer into assembled unit.
FRONT VIEW
wide
wine rack assembly 1
wine rack panel
11 Fit slot of wine rack panel into corresponding slot of another wine rack panel as shown. Repeat for additional
wine rack assembly.
Made in China - r05
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
narrow
wine rack assembly 2
wide
12 Insert 2 wine rack assemblies into assembled unit as shown. Make sure wide and narrow openings of each wine rack assembly are oriented as shown. Assembly is now complete.
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Do not use furniture wax or polish as the wood is finished with a protective clear lacquer.
Page 4 of 5
TRIAD WINE TOWER
WALL
wall
bracket
large
D
screw
C
plastic anchor
medium
A
screw
F
wall strap
wall
bracket
Safety Mounting Assembly
For added safety and stability, it is recommended that the wall mounting hardware be installed. For safe mounting, it is essential to use wall anchors appropriate to your wall type (i.e. plaster, drywall, concrete, etc.). Mount to wood studs whenever possible. A) Attach wall bracket to top of unit using 2 medium screws as shown. B) Determine the final location of unit. Mark position on the wall, approximately 2" below the wall bracket mounted to the back of the unit. C) Drill a hole in the wall stud. If the wall stud is not available, drill a hole in the wall that is slightly smaller in diameter than the anchor. Gently tap the plastic anchor until the flange of the anchor is flush with the wall. D) Attach wall bracket to the wall by inserting 2 large screws, and into the plastic anchor in the wall. E) Place the unit so the wall brackets on the back edge are aligned with the wall brackets on the wall. F) Lace one end of the wall strap through both brackets, and into the other end of the strap. G) Pull the strap tightly until secure. H) Repeat steps A-G for remaining wall brackets and wall straps. Safety mounting assembly is now complete.
NOTE: If you are unsure about your wall type or what mounting method you should use, consult a qualified professional or your local hardware store.
Made in China - r05
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
Page 5 of 5
Loading...