Crate & Barrel Triad High Dining Table Assembly Instruction
TRIAD HIGH DINING TABLE
HARDWARE
Thank you for purchasing the Triad High Dining Table.
This page lists all the contents included in the box.
Please take time to identify the hardware as well as the
individual components of this product. As you unpack
and prepare for assembly, place the contents on a
carpeted or padded area to protect them from damage.
Note: 2 people are required to safely assemble this product.
COMPONENTS
8 - bolts
8 - spring
washers
Missing hardware? Please call 800.606.6387 for replacements.
2 - screw
posts
8 - flat
washers
2 - cams
TOOLS REQUIRED
1 - small allen wrench
(included)
1 - large allen wrench
(included)
NOTE: Do not over
tighten the screw posts
leg frame
2 - leg frames
NOTE: Make sure holes of
cam and crossbar are aligned
crossbar
1 - tabletop
1 - crossbar
Made in China - r09 Page 1 of 2
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
1 A) Insert 1 screw post into each leg frame as
shown.
B) Insert 2 cams into crossbar as shown. Using a
small allen wrench, make sure holes of cam and
crossbar are aligned.
TRIAD HIGH DINING TABLE
small allen
wrench
B
set
screw
B
crossbar
screw
post
2 A) With the assistance of another adult, place table-
top face down onto a clean, padded surface. Fit dowels
of tabletop into corresponding holes of leg frame, and
attach with 4 bolts, 4 spring washers, and 4 flat
washers as shown. Do not fully tighten bolts.
B) Fit dowel of crossbar into corresponding hole of leg
frame as shown. Using a small allen wrench, turn
pre-attached set screw of cam clockwise until it is
securely engages the screw post.
flat washer
B
large allen
wrench
crossbar
B
A
tabletop
A
leg
frame
spring washer
bolt
NOTE: Do not fully
tighten the bolts
B
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. Do not use furniture wax or polish as the
wood is finished with a protective clear lacquer.
3 A) Fit dowel of crossbar into corresponding hole of
remaining leg frame as shown. Secure set screw.
B) Fit dowels of tabletop into corresponding holes of leg
frame, and attach with 4 bolts, 4 spring washers, and 4
flat washers. At this point, fully tighten all bolts with a
large allen wrench. Assembly is now complete.
Made in China - r09 Page 2 of 2
Customer Service 800.967.6696 | Latest instructions available on www.crateandbarrel.com
Loading...