TRIAD EXTENSION DINING TABLE
HARDWARE
Thank you for purchasing the Triad Extension Dining
Table. This page lists all the contents included in the
box. Please take time to identify the hardware as well
as the individual components of this product. As you
unpack and prepare for assembly, place the contents
on a carpeted or padded area to protect them from
damage.
Note: 2 people are required to safely assemble this product.
COMPONENTS
10 - bolts
Missing hardware?
Please call 800.606.6387 for replacements.
TOOLS REQUIRED
allen wrench (included)
ASSEMBLY
10 - flat
washers
10 - spring
washers
1 - tabletop
tabletop
1 - leaf
Made in China - r02 Page 1 of 2
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
2 - leg frames
1 With the assistance of another adult, carefully place tabletop
face down on a clean, padded surface. Attach each leg frame
with 5 bolts, 5 spring washers, and 5 flat washers as shown.
Secure bolts with an allen wrench. Carefully position unit upright.
Assembly is now complete.
leg
frame
TRIAD EXTENSION DINING TABLE
EXTENSION LEAF INSTALLATION
leaf
Turn mechanism
counterclockwise
to unlock
OFF
ON
2 Release tabletop sections by unlocking 2 mechanisms
on underside of tabletop. With the assistance of another
adult, pull apart tabletop evenly on each side and position
leaf as shown. Make sure pins in the tabletop align with
the locator holes in the leaf.
NOTE: Make sure pins in the
tabletop align with the locator
holes in the leaf.
Turn mechanism
clockwise to lock
OFF
ON
3 Push ends of tabletop back together and secure
lock mechanisms underneath tabletop.
Leaf installation is now complete.
CLEANING & CARE
Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. Do not use furniture wax or polish as
the unit is finished with a protective clear lacquer. It is
recommended to use coasters to protect surface from
heat and water.
Made in China - r02 Page 2 of 2
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com