Crate & Barrel Trestle Drop-Leaf Table Assembly Instruction

TRESTLE DROP-LEAF TABLE

HARDWARE

Thank you for purchasing the Trestle Drop-Leaf Table.
This page lists all the contents included in the box.
Please take time to identify the hardware as well as the
individual components of this product. As you unpack
and prepare for assembly, place the contents on a
carpeted or padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

COMPONENTS

8 - bolts 8 - spring

6 - barrel
screws

Missing hardware?
Please call 800.606.6387 for replacements.

8 - flat
washers

6 - barrel
nuts

washers

6 - set
screws

TOOLS REQUIRED

flat head screwdriver

phillips head screwdriver allen wrench (included)

(We recommend the use of hand tools instead of power tools)

NOTE: Make sure hole
of barrel screw faces
end of leg

NOTE: Do not over tighten
the barrel screws

A

B

1 - tabletop

1 - table

2 - left
legs

Made in Vietnam - r03 Page 1 of 2

2 - right
legs

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

crossbar

2 - leg
crossbars

NOTE: Make sure
hole of barrel nut
aligns with nearest
edge with holes

1 A) Insert 1 barrel screw into both left and right legs. Secure,
but do not over tighten, barrel screws with a flat head
screwdriver. Make sure to align hole of each barrel screw so it
faces the ends of each leg as shown.
B) Insert 2 barrel nuts, 1 barrel screw into each leg crossbar as
shown. Using a flat head screwdriver, align hole of each barrel nut
with the nearest edge with holes.

TRESTLE DROP-LEAF TABLE

NOTE: Make sure set
screw is securely engaged
with barrel screw

2 A) Fit dowels of leg crossbar into corresponding holes
of left and right legs as shown.
B) Insert 1 set screw into each barrel nut as shown. Secure
set screws with a phillips head screwdriver. Make sure
each set screw securely engages with barrel screw.

A

B

B

3 A) Insert 2 barrel nuts into table crossbar as shown.
B) Fit dowels of table crossbar into corresponding holes of
leg frames as shown. Insert 1 set screw into each barrel
nut as shown, and secure with a screwdriver. Make sure
each set screw securely engages with barrel screw.

DROP-LEAF EXTENSION

NOTE: Do not over tighten
the bolts

4 With the assistance of another adult, carefully position
tabletop upside down on a clean, padded surface as
shown. Attach leg assembly to apron of tabletop with 2
bolts, 2 spring washers and 2 flat washers per leg.
Secure, but do not over tighten, bolts with an allen wrench.
Assembly is now complete.

Hold tabletop end. Reach under and push slide bars in.
Gently drop tabletop down. Repeat steps for remaining
end.

CLEANING AND CARE

Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. Do not use furniture wax or polish as the
wood is finished with a protective clear lacquer.

Made in Vietnam - r03 Page 2 of 2

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com