Crate & Barrel Tivoli Extension Dining Table Assembly Instruction

TIVOLI EXTENSION DINING TABLE

HARDWARE

Thank you for purchasing the Tivoli Extension Dining
Table. This page lists all the contents included in the

box. Please take time to identify the hardware as well
as the individual components of this product. As you
unpack and prepare for assembly, place the contents
on a carpeted or padded area to protect them from
damage.

Note: 2 people are required to safely assemble this product.

flat
washer

spring
washer

hex nut

8 - nuts 8 - flat

washers

Missing hardware? Please call 800.606.6387 for replacements.

8 - spring
washers

TOOLS REQUIRED

hex wrench (included)

COMPONENTS

1 - tabletop 4 - legs1 - leaf

1 With the assistance of another adult, place
tabletop face down onto a clean, padded surface.
Insert threaded bolts of each leg into tabletop as
shown. Attach each leg with 2 hex nuts, 2 spring
washers and 2 flat washers. Fully tighten all nuts
with a hex wrench. Position unit upright.
Assembly is now complete.

Made in China - r03 Page 1 of 2

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

TIVOLI EXTENSION DINING TABLE

EXTENSION LEAF INSTALLATION

A

OFF

ON

2 A) Locate the 2 metal clasps on the underside of the tabletop. Turn each clasp counter clockwise to unlock
as shown.
B) With the assistance of another adult, pull 2 tabletop sections apart. Unfold apron on leaf as shown and place
leaf into position, aligning metal pins on leaf with matching locator holes. Push both tabletops towards the
center.

B

EXTENSION LEAF STORAGE

4 Remove leaf by unlocking clasps and fold apron as shown.
With the tabletop fully extended, turn leaf 90º and place on
storage slats. Fit pins of leaf into corresponding holes of
tabletop as shown. Close tabletop sections and re-latch the
2 locking clasps. Extension leaf storage is now complete.

3 Re-latch clasps on underside of tabletop to the
leaf. Installation of the leaf is now complete.

Made in China - r03 Page 2 of 2

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

CLEANING AND CARE

Clean surfaces with a dry or damp soft cloth.
Do not use abrasive cleaners. Do not use furniture
wax or polish as the wood is finished with a
protective clear lacquer.