TIVOLI CORNER CABINET
ASSEMBLY HARDWARE
Thank you for purchasing the Tivoli Corner Cabinet.
This page lists all the contents included in the box.
Please take time to identify the hardware as well as the
individual components of this product. As you unpack
and prepare for assembly, place the contents on a
carpeted or padded area to protect them from damage.
Note: 2 people are required to safely assemble this product.
COMPONENTS
20 - small
screws
4 - spring
washers
Missing hardware?
Please call 800.606.6387 for replacements.
24 - medium
screws
4 - flat
washers
6 - large
screws
6 - handle
screws
WALL MOUNTING HARDWARE
4 - mounting
brackets
2 - wall
straps
4 - plastic
anchors
4 - small
wall screws
2- small
bolts
1 - handle 1 - plate
2- large
bolts
4 - large
wall screws
1 - top
panel
1 - front frame
3 - shelves
2 - side panels
(1 right, 1 left)
1 - bottom
panel
TOOLS REQUIRED
phillips head screwdriver
(We recommend the use of hand tools instead of power tools)
Made in China - r06 Page 1 of 3
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
1 With the assistance of another adult, attach left and
right side panels with 6 large screws as shown. Secure,
but do not over tighten, screws with a phillips head
screwdriver.
right side
panel
left side
panel
TIVOLI CORNER CABINET
bottom panel
shelf
shelf
NOTE: Do not
over tighten
the screws
shelf
left side
panel
B
A
NOTE: Do not
over tighten
the bolts
front frame
right side
panel
2 With the assistance of another adult, carefully
position unit onto the right side panel as shown. Place
shelves and bottom panel to corresponding ledge of
assembled unit as shown. Secure each panel with 6
medium screws, using a screwdriver. Do not over
tighten the screws.
A
front frame
left side
panel
B
3 A) With the assistance of another adult, attach front
frame to left side panel of assembled unit with 7 small
screws, using a screwdriver.
B) Secure front frame to bottom panel of assembled unit
with 2 small bolts, 2 spring washers and 2 flat washers,
using a screwdriver. Do not over tighten the bolts.
top
panel
A
A
B
B
C
C
right side
panel
5 A) With the assistance of another adult, carefully position
unit upright. Attach top panel to assembled unit as shown.
Secure side panels to top panel with 6 small screws.
4 With the assistance of another adult, carefully
position unit onto the left side panel and secure front
frame to the right side panel with 7 small screws.
Made in China - r06 Page 2 of 3
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
B) Open doors of front frame, and secure top panel with 2
large bolts, 2 spring washers and 2 flat washers.
C) Attach plate to left door with 2 handle screws and handle
to right door with 4 handle screws as shown, using a screwdriver.
Assembly is now complete.
TIVOLI CORNER CABINET
C
plastic
anchor
mounting
bracket
A
small wall
screw
D
large wall
screw
F
wall
strap
WALL MOUNTING INSTRUCTIONS
For added safety and stability, it is recommended that the
wall mounting hardware be installed. For safe mounting, it
is essential to use wall anchors appropriate to your wall
type (i.e. plaster, drywall, concrete, etc.). Mount to wood
studs whenever possible.
A) Attach 2 mounting brackets to assembled unit as
shown, using 2 small screws.
B) Determine the final location of unit. Mark position on
the wall, approximately 2" below the bracket mounted to
the back of the unit.
C) Drill a pilot hole in the wall stud. If the wall stud is not
available, drill a hole in the wall that is slightly smaller in
diameter than the anchor. Insert plastic anchors into hole
and secure using a phillips screwdriver.
D) Attach the mounting bracket to the wall by inserting 1
large screws through the mounting bracket and into each
plastic anchor in the wall.
E) Place the unit so the mounting bracket on the back
edge is aligned with the mounting bracket on wall.
F) Lace one end of the wall strap through both brackets,
and into the other end of the strap.
G) Pull the strap tightly until secure.
Repeat steps for remaining wall mounting hardware.
NOTE: If you are unsure about your wall
type or what mounting method you
should use, consult a qualified
professional or your local hardware store.
CLEANING & CARE
Clean surfaces with a dry or damp soft
cloth. Do not use abrasive cleaners. Do
not use furniture wax or polish as the unit is
finished with a protective clear lacquer.
Wall mounting assembly is now complete.
Made in China - r06 Page 3 of 3
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
Loading...