Crate & Barrel Tivoli Buffet Assembly Instruction
TIVOLI BUFFET
HARDWARE
Thank you for purchasing the Tivoli Buffet. This page
lists all the contents included in the box. Please take
time to identify the hardware as well as the individual
components of this product. As you unpack and
prepare for assembly, place the contents on a carpeted
or padded area to protect them from damage.
Note: 2 people are required to safely assemble this product.
COMPONENTS
BOX 1
18 -small
screws
4 - allen
bolts
1 - handle 1 - plate
10 - medium
screws
18 - flat
washers
10 - large
screws
18 - spring
washers
2 - pulls
TOOLS REQUIRED
phillips head screwdriver
(We recommend the use of hand tools instead of power tools)
allen wrench (included)
COMPONENTS
BOX 2
14 - phillips
bolts
4 - shelf
pins
Missing hardware?
Please call
800.606.6387
for replacements.
1 - top panel
1 - bottom panel
1 - adjustable
1 - front frame
1 - drawer
front panel
Made in China - r06 Page 1 of 3
1 - drawer
back panel
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
1 - back panel
1 - drawer bottom
2 - drawer sides
(1 left, 1 right)
1 - drawer crossbar
2 - side panels
(1 left, 1 right)
shelf
TIVOLI BUFFET
bottom panel
left side panel
right side panel
1 With the assistance of another adult, fit dowels of
bottom panel into corresponding holes of left and right
side panels. Secure bottom panel to side panels with 4
phillips bolts, 4 spring washers and 4 flat washers
using a phillips screw driver. Do not over tighten the
bolts.
top panel
front
frame
NOTE: Do not over
tighten the bolts
B
B
A
2 With the assistance of another adult, carefully place front
frame onto a clean, padded surface. Fit dowels of
assembled unit into corresponding holes of front frame as
shown. Secure front panel with 8 phillips bolts, 8 spring
washers and 8 flat washers.
A
NOTE: Do not over
tighten the screws
3 A) With the assistance of another adult, carefully
position unit upright. Fit dowels of assembled unit into
corresponding holes of top panel. Secure top panel to
side panels with 4 allen bolts, 4 spring washers and 4
flat washers, using an allen wrench.
B) Secure top panel to front frame with 2 phillips bolts,
2 spring washers and 2 flat washers, using a screwdriver.
Made in China - r06 Page 2 of 3
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
4 Attach back panel to assembled unit with 18 small
screws, using a screwdriver.
back panel
Loading...