Crate & Barrel Three-Part Laundry Sorter Assembly Instruction

3-WAY LAUNDRY SORTER

Thank you for purchasing the 3-Way Laundry Sorter.
This page lists all the contents included in the box.
Please take time to identify the hardware as well as the
individual components of this product. As you unpack
and prepare for assembly, place the contents on a
carpeted or padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

ASSEMBLY HARDWARE

10 - small
screws

56 - washers

28 - bolts

28 - bolt
covers

Missing hardware? Please call

800.606.6387 for replacements.

8 - large
screws

14 - barrel
nuts

TOOLS REQUIRED

allen wrench

flat head screwdriver

phillips head screwdriver

(We recommended the use of hand tools instead power tools)

CLEANING AND CARE

Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. Do not use furniture wax or polish as
the wood is finished with a protective clear lacquer.

COMPONENTS

2 - outer
side frames

(1 left, 1 right)

2 - top
crossbars

2 - back
crossbars

1 - middle
crossbar

2 - glides

4 - wheels

3 - laundry
bags

2 - rod
crossbars

6 - rods

2 - inner
side frames

(1 left, 1 right)

1 - top panel

Made in China - r06 Page 1 of 3

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

3-WAY LAUNDRY SORTER

outer left
side frame

NOTE: Make sure
holes on each barrel
nut are aligned
with holes in
crossbars

top
crossbar

DETAILED
SIDE VIEW

outer right
side frame

A

NOTE: Do not over
tighten the screws

top crossbar

1 A) Insert 2 barrel nuts into each top crossbar. Using a flat head
screwdriver, align holes of each barrel nut with holes in crossbars.
B) Attach 2 top crossbars to outer left and right side frames with
4 bolts and 8 washers per side as shown. Using a allen wrench,
make sure each bolt engages each barrel nut. Loosely secure bolts.

NOTE: Do not over
tighten the bolts

back crossbar

back crossbar

top panel

2 With the assistance of another adult, attach
top panel to outer left and right side frames
with 8 large screws as shown. Secure, but do
not over tighten, screws using a phillips head

screwdriver.

NOTE: Do not over
tighten the screws

glide

NOTE: Make sure inner
glide is pulled out of
outer glide as shown

3 A) Insert 2 barrel nuts into each back crossbar.
B) Attach 2 back crossbars to outer left and right side
frames with 4 bolts and 8 washers per side as shown.
At this point, fully secure, but do not over tighten, all bolts
using a allen wrench.

Made in China - r06 Page 2 of 3

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

4 With the assistance of another adult, position unit as
shown. Fully extend each glide as shown. Attach 2 glides
to outer left and right side frames with 3 smalls screws
per side. Secure, but do not over tighten, screws using a
screwdriver.