Crate & Barrel Terrace Table and Chairs Assembly Instruction
TERRACE TABLE
Thank you for purchasing the Terrace Table. This page
lists all the contents included in the box. Please take
time to identify the hardware as well as the individual
components of this product. As you unpack and
prepare for assembly, place the contents on a carpeted
or padded area to protect them from damage.
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not
use abrasive cleaners.
HARDWARE
2 - bolts 4 - washers 2 - acorn
Missing hardware?
Please call 800.606.6387 for replacements.
2 - caps 2 - hex
nuts
nuts
COMPONENTS
1 - tabletop 1 - leg
frame
TOOLS REQUIRED
allen wrench (included) hex wrench (included)
(We recommend the use of hand tools instead of power tools)
ASSEMBLY
A
leg
frame
tabletop
A) Place tabletop upside down onto a clean,
padded surface. Unfold leg frame as shown.
B) Insert crossbar of leg frame into
corresponding hooks of tabletop as shown.
Make sure crossbar is securely engaged by
each hook.
B
crossbar
B
C
C
acron
nut
hex
nut
washer
washer
C) Pull back leg frame and align holes with corresponding brackets of
tabletop as shown. Secure leg frame with 1 acrorn nut, 1 hex nut, 2
washers and 1 bolt per bracket as shown. Fasten the bolts with an allen
wrench and nuts with a hex wrench. At the point, cover each bolt with
1 cap. Position unit upright.
Assembly is now complete.
bolt
cap
NOTE: When attaching the
leg frame, make sure the
bolts are facing outwards
and the nuts are facing
each other.
Made in China - r04 Page 1 of 1
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
TERRACE CHAIR
Thank you for purchasing the Terrace Chair. This page
lists all the contents included in the box. Please take
time to identify the hardware as well as the individual
components of this product. As you unpack and
prepare for assembly, place the contents on a carpeted
or padded area to protect them from damage.
COMPONENTS
1 - chair
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not
use abrasive cleaners.
foot
A
crossbar
pull frame
upwards
seat will
move
forward
B C
NOTE: Make sure hands
and fingers are away from
the hinged areas
push seat
down
A) Lay folded chair flat on its back on
a clean, padded surface as shown.
Made in China - r02 Page 1 of 1
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
B) Holding crossbar with foot as
shown, grasp frame and pull upwards.
Make sure hands and fingers are away
from the hinged areas.
C) Position unfolded chair upright.
Push down on the seat to make
sure it is fully opened.
Assembly is now complete.
Loading...