Crate & Barrel Summit Extension Dining Table Assembly Instruction

SUMMIT EXTENSION DINING TABLE

HARDWARE

Thank you for purchasing the Summit Extension
Dining Table. This page lists all the contents included

in the box. Please take time to identify the hardware as
well as the individual components of this product. As
you unpack and prepare for assembly, place the
contents on a carpeted or padded area to protect them
from damage.

Note: 2 people are required to safely assemble this product.

COMPONENTS

8 - hex nuts

8 - spring washers

8 - flat washers

Missing hardware?
Please call 800.606.6387 for replacements.

TOOLS REQUIRED

hex wrench (included)

flat washer

spring washer

hex bolt

1 - tabletop

(leaf pre-assembled)

OFF

ON

OFF

ON

1 With the assistance of another adult, carefully place
tabletop upside down onto a clean, padded surface.
Loosely attach each leg with 2 hex nuts, 2 spring

4 - legs

Made in China - r02 Page 1 of 2

Customer Service 800.967.6696 | www.crateandbarrel.com

washers, and 2 flat washers as shown.

SUMMIT EXTENSION DINING TABLE

REMOVING LEAF ASSEMBLY

Turn mechanism
counterclockwise
to unlock

OFF

ON

2 With the assistance of another adult, carefully position
assembled unit upright. Unlock mechanism underneath
tabletop.

Make sure pins in the
tabletop align with the locator
holes in the leaf.

Turn mechanism
clockwise to lock

OFF

ON

3 With the assistance of another adult, pull apart tabletop evenly
on each side and remove leaf. Make sure to detach pins in the
tabletop from the leaf. Push ends of tabletop back together and
lock mechanisms underneath tabletop.
Assembly is now complete.

CLEANING AND CARE

Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. Do not use furniture wax or polish as the
wood is finished with a protective clear lacquer.

Made in China - r02 Page 2 of 2

Customer Service 800.967.6696 | www.crateandbarrel.com