SUMMIT BUFFET
Thank you for purchasing the Summit Buffet. This page
lists all the contents included in the box. Please take
time to identify the hardware as well as the individual
components of this product. As you unpack and prepare
for assembly, place the contents on a carpeted or
padded area to protect them from damage.
Note: 2 people are required to safely assemble this product.
HARDWARE
6 - cam
screws
10 - spring
washers
2 - pulls
Missing hardware? Please call
800.606.6387 for replacements.
6 - cams
10 - flat
washers
8 - shelf
pins
TOOLS REQUIRED
phillips head screwdriver
2 - small
bolts
26 - small
screws
4 - pull
bolts
8 - large
bolts
2 - large
screws
COMPONENTS
1 - buffet top assembly
(with pre-assembled drawers)
2 - adjustable
shelves
2 - doors
(1 left, 1 right)
1 - bottom
panel
1 - partition
1 - center
support
2 - side panels
(1 left, 1 right)
2 - back
panels
Made in China - r03 Page 1 of 4
Customer Service 800.967.6696 | www.crateandbarrel.com
SUMMIT BUFFET
buffet top
assembly
1 Remove 2 drawer assemblies from buffet top
assembly as shown. Set drawer assemblies aside
until further instructions.
NOTE: Make sure
arrows on each cam
points toward
nearest edge with
holes.
A
B
A
B
partition
2 A) Insert 2 cam screws into buffet top assembly as shown.
Secure cam screws with a phillips head screwdriver.
B) Insert 2 cams into partition as shown. Make sure arrows on
each cam points toward nearest edge with holes.
C) Fit pre-assembled dowels of partition into corresponding
holes of buffet top assembly as shown. With a screwdriver,
turn cams clockwise until it securely engages each cam screw.
bottom
panel
3 Fit dowels of partition into corresponding holes of
bottom panel as shown. Secure bottom panel with 2
large screws as shown, using a screwdriver.
left side
panel
A
B
A
B
4 A) Insert 2 cam screws into left/right side panels as
shown.
B) Insert 4 cams into bottom panel as shown. Secure all
cams.
right side
panel
Made in China - r03 Page 2 of 4
Customer Service 800.967.6696 | www.crateandbarrel.com
SUMMIT BUFFET
left side
panel
right side
panel
5 Secure buffet top assembly with 4 large bolts, 4
spring washers, and 4 flat washers per side panel.
Secure bolts with a screwdriver.
center
support
6 Attach center support to bottom of assembled
unit as shown with 2 small bolts, 2 spring washers,
and 2 flat washers.
7 Attach 2 back panels to assembled unit as shown
with 26 small screws. Secure screws with a
screwdriver.
A
A
B
adjustable
shelf
8 A) Insert 8 shelf pins at desired shelf heights as
shown.
B) Place 2 adjustable shelves into assembled unit as
shown. Make sure each shelf is supported by shelf
pins.
Made in China - r03 Page 3 of 4
Customer Service 800.967.6696 | www.crateandbarrel.com
SUMMIT BUFFET
9 A) Attach 1 pull to each drawer with 2 pull bolts as
shown. Secure bolts with a screwdriver.
B) Fit drawer glides of 2 drawer assemblies into
corresponding drawer glides of assembled unit as
shown.
LEVERS LOCATED
BEHIND DOOR
FRAMES
10 With the assistance of another adult, carefully place unit
upright. Insert bottom edge of right door into bottom back
groove of unit as shown. Press and hold down both levers
(located at the back of door) to insert top edge of door into
top back groove of unit. Release levers to secure door.
Repeat for left door using the front groove of unit.
Assembly is now complete.
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. Do not use furniture wax or polish as the
wood is finished with a protective clear lacquer.
Made in China - r03 Page 4 of 4
Customer Service 800.967.6696 | www.crateandbarrel.com
Loading...