STUDIO COMPACT OFFICE
Thank you for purchasing the Studio Compact Office.
This page lists all the contents included in the box.
Please take time to identify the hardware as well as the
individual components of this product. As you unpack
and prepare for assembly, place the contents on a
carpeted or padded area to protect them from damage.
Note: 2 people are required to safely assemble this product.
HARDWARE
16 - wood
dowels
6 - small
bolts
4 - file crossbars
(2 legal, 2 letter)
4 - cam
screws
44 - screws 8 - flat
4 - hinges 2 - pulls 8 - shelf
TOOLS REQUIRED
phillips head screwdriver
flat head screwdriver
Missing hardware? Please call
800.606.6387 for replacements.
4 - cams 15 - allen
bolts
8 - spring
washers
washers
pins
allen wrench
(included)
8 - large
bolts
11 - barrel
nuts
8 - drawer
barrel nuts
COMPONENTS
1- bottom
panel
2 - side panels
(1 left, 1 right)
1 - top
panel
1 - tray
1 - partition 1 - fixed
shelf
1 - back
panel
4 - legs
2 - adjustable
shelves
2 - drawer sides
(1 left, 1 right)
Made in China - r06 Page 1 of 5
1 - drawer
back
Customer Service 800.967.6696 | www.crateandbarrel.com
1 - drawer
front
1 - drawer
bottom
2 - doors
(1 left, 1 right)
STUDIO COMPACT OFFICE
A
fixed shelf
NOTE: Make sure
threaded holes of
each barrel nut is
aligned with holes
in panel edge.
B
partition
NOTE: Make sure
arrows on each cam
points towards nearest
edge with holes.
1 A) Insert 4 cams and 4 wood dowels into fixed shelf as
shown. Make sure arrows on each cam points towards
nearest edge with holes.
B) Insert 2 cam screws, 3 barrel nuts, and 2 wood dowels
into partition as shown. Secure cam screws with a phillips
head screwdriver. With a screwdriver, turn barrel nut so the
threaded holes are aligned with holes in panel edge as
shown.
A
right side
panel
B
left side
panel
2 A) Insert 5 wood dowels and 2 barrel nuts into right side
panel as shown.
B)Insert 2 barrel nuts, 5 wood dowels and 2 cam screws into
left side panels as shown.
left side
panel
fixed
shelf
partition
3 Fit dowels of fixed shelf into left side panel and
partition as shown. With a screwdriver, turn each cam
clockwise until it securely engages each cam screw.
bottom
panel
4 Fit dowels of assembled unit into corresponding
holes of bottom panel. Insert 4 allen bolts into barrel
nuts of assembled unit, using an allen wrench.
Made in China - r06 Page 2 of 5
Customer Service 800.967.6696 | www.crateandbarrel.com
STUDIO COMPACT OFFICE
back
panel
5 Slide back panel thru grooves of left side panel of
assembled unit as shown.
right side
panel
A
B
6 A) Insert 1 allen bolt into barrel nut of partition. Secure
bolt with an allen wrench.
B) Fit dowels of right side panel into corresponding holes of
assembled unit. Insert 2 allen bolts into barrel nuts of left
side panel.
leg
8 Attach 4 legs to bottom panel with 2 allen bolts, 2
spring washers, and 2 flat washers per leg as shown.
Secure bolts with an allen wrench.
top
panel
9 Fit dowels of assembled unit into corresponding
holes of top panel as shown.. Secure top panel with 6
small bolts, using a screwdriver.
Made in China - r06 Page 3 of 5
Customer Service 800.967.6696 | www.crateandbarrel.com
STUDIO COMPACT OFFICE
left and right
doors
B
A
hinge
10 Attach 2 hinges to left and right doors with 3
screws per hinge as shown. Secure screws with a
screwdriver.
drawer
A
front
A
B
11 A) Attach hinges of each door onto assembled unit with 6
screws per hinge as shown.
B) Attach pulls to left and right doors with 2 screws per pull
as shown. Secure screws with a screwdriver.
left
drawer
C
drawer
front
side
B
drawer
left and right
B
drawer sides
right
drawer
A
NOTE: Make sure
threaded holes of
each barrel nut is
aligned with holes
in panel edge.
12 A) Insert 4 barrel nuts into drawer front as shown.
With a flathead screwdriver, turn nut so the threaded
holes are aligned with holes in panel edge as shown.
B) Insert 4 drawer barrel nuts into left and right drawer
sides as shown.
Made in China - r06 Page 4 of 5
Customer Service 800.967.6696 | www.crateandbarrel.com
side
13 A) Attach right drawer side to drawer front and back
with 4 large bolts as shown. Secure bolts with a
screwdriver.
B) Slide drawer bottom into grooves of drawer assembly
as shown.
C) Attach left drawer side to drawer assembly with 4
large bolts as shown.
bottom
drawer
back
STUDIO COMPACT OFFICE
ORIENTATION
FOR LETTER SIZE
HANGING FOLDERS
ORIENTATION
FOR LEGAL SIZE
HANGING FOLDERS
A
A
B
B
14 Depending on the desired hanging file size (legal or
letter), insert 2 file crossbars into corresponding slots of
drawer assembly as shown.
15 A) Insert 1 screw into each hinge of assembled unit
as shown. Secure screw with a screwdriver.
B) Fit glides of drawer assembly into corresponding
glides of assembled unit as shown.
A
A
B
adjustable
shelves
17 A) Insert 8 shelf pins at desired shelf heights as shown.
B) Place 2 adjustable shelves into assembled unit as shown.
Make sure each shelf is securely supported by shelf pins.
Assembly is now complete.
16 Fit pre-assembled glides of tray into corresponding
glides of assembled unit as shown.
Made in China - r06 Page 5 of 5
Customer Service 800.967.6696 | www.crateandbarrel.com
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. Do not use furniture wax or polish as the
wood is finished with a protective clear lacquer.
Loading...