Crate & Barrel Springdale Black 2-door Cupboard, Springdale 2-door Cupboard Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com

SPRINGDALE 2 DOOR CUPBOARD

Thank you for purchasing the Springdale 2 Door
Cabinet. This page

box. Please take the time to identify the hardware as
well as the individual components
you unpack and prepare for assembly, place the
contents on a carpeted or padded area to protect them
from damage.

Note: 2 people are required to safely assemble this product.

lists all the contents included in the

to this product. As

COMPONENTS

1 - left side
panel

1 - right side
panel

1 - left
door

1 - top back panel 1 - center support

Made in China RO4 Page 1 of 3

1- bottom back panel

leg

HARDWARE

18 - wood
dowels

25 - pan head
screws

2 - medium
screws

Missing hardware?
Please call 800.606.6387 for replacements.

16 - cams 16 - cam

18 - small
screws

8 - shelf
pins

TOOLS REQUIRED

Phillips head screwdriver

1 - top
panel

1 - bottom
panel

1 - fixed
shelf

1 - right
door

2 - adjustable
shelves

1 - back top
crossbar

1 - back bottom
crossbar

screws

2 - metal
knobs

1 - plastic
channel

6 - large
screws

2 - pull
screws

Customer Service 800-967-6696 | http://www.crateandbarrel.com

SPRINGDALE

2 DOOR CUPBOARD

B

Carefully lay left & right side panels onto a padded

1

surface.
A) Insert 6 wood dowels into each side panel as
shown.
B) Insert 6 cam screws into each side panel, and
secure with a phillips head screwdriver.

A

B

3 A) Insert 12 cams into holes on the fixed shelf and  
bottom panel and top back crossbar as shown. Make

sure arrows on each cam point towards the nearest edge
with holes.
B. With the assistance of another adult, align dowels and
cam screws of side panels with corresponding holes in the
fixed shelf , bottom panel and top back crossbar. Secure
each cam with a phillips head screwdriver by turning
clockwise until cam securely engages each cam screw.

Made in China RO4

A

B

A

A

A

B

B

A) Attach back bottom crossbar to bottom panel

2

with 3 large screws and 2 wood dowels.
B) Fasten center support leg onto bottom panel
with 2 medium screws and 2 wood dowels.
Secure with a Phillips head screwdriver.

D

A

B

C

E

4

A) Insert 2 wood dowels into back top crossbar.
B) Insert 2 cams into each side panel, making sure
arrows face towards edge with dowels.
C) Insert 4 cam screws into underside of top panel.
D) Fit top panel into position, aligning cam screws and
dowels with corresponding holes. Secure all cams with
a Phillips head screwdriver.
E) Finalize top assembly with 3 large screws.

Page 2 of 3

Customer Service 800-967-6696 | http://www.crateandbarrel.com

SPRINGDALE

2 DOOR CUPBOARD

A) Slide plastic channel onto top and bottom back

5

panels as shown.
B) Align holes in back panels with holes in back of
assembled unit. Fasten into position with 25 screws.

X8

A

A

B

B

A) Insert 8 shelf pins into holes at desired shelf

7

height.
B) Fit 2 adjustable shelves into assembled unit,
making sure each shelf is firmly supported by the
shelf pins.

Made in China RO4 Page 3 of 3

A

X2

B

X18

A

B

A) Using 3 small screws per hinge secure doors on

6

assembled unit with a Phillips head screwdriver.
B) Attach 2 door pulls to doors using 2 pull screws.
Fasten screws with a Phillips head screwdriver.

X4

8

To compensate for uneven floors and to aid in door
alignment, adjust each leveler to make the unit
level. Turn each leveler counter-clockwise to lower
the unit and clockwise to raise the unit.
Assembly is now complete.

CLEANING AND CARE

Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. Do not use furniture wax or polish as
the unit is finished with a protective clear lacquer.