Crate & Barrel Spencer 5-Piece Dining Set Black, Spencer 7-Piece Dining Set Black, Spencer 5-Piece Dining Set, Spencer 7-Piece Dining Set, Spencer Pedestal Extension Dining Table Black Assembly Instruction
...
SPENCER PEDESTAL EXTENSION TABLE
HARDWARE
Thank you for purchasing the Spencer Pedestal
Extension Table. This page lists all the contents
included in the box. Please take time to identify the
hardware as well as the individual components of this
product. As you unpack and prepare for assembly,
place the contents on a carpeted or padded area to
protect them from damage.
Note: 2 people are required to safely assemble this product.
COMPONENTS
12 - hex
nuts
Missing hardware? Please call 800.606.6387
for replacements.
12 - spring
washers
12 - flat
washers
TOOLS REQUIRED
hex wrench (included)
Phillips head screwdriver
(included)
e
1 - tabletop (extension
pre-assembled)
1 With assistance of another adult, carefully place
4 - legs
Made in China R02 Page 1 of 3
1 - pedestal
Customer Service 800.967.6696 | www.crateandbarrel.com
tabletop face down on a padded surface. Using a
Phillips head screwdriver, unscrew pre-assembled
bolts, spring washers, and flat washers from
mounting panel. Set aside mounting panel and
associated hardware.
SPENCER PEDESTAL EXTENSION TABLE
2 Fit 4 legs into pedestal by aligning pre-assembled
bolts with corresponding holes as shown. Secure
each leg with 2 hex nuts, 2 spring washers, and 2
flat washers using a hex wrench.
B
B
A
NOTE: Make sure preassembled small square
panel on mounting panel
is facing downwards.
3 A) With the assistance of another adult, position unit
upright. Carefully fit mounting panel onto pedestal as
shown by aligning pre-assembled bolts with
corresponding holes.
B) Secure pedestal assembly with 4 hex nuts, 4 spring
washers, and 4 flat washers using a hex wrench.
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth.
Do not use abrasive cleaners. Do not use
furniture wax or polish as the wood is finished
with a protective clear lacquer.
5 With the assistance of another adult, position
tabletop face down onto a padded surface. Carefully
fit pedestal assembly onto tabletop. Fully tighten with
hardware removed in step 1 (8 bolts, 8 spring
washers, and 8 flat washers) using a Phillips head
screwdriver. Assembly is now complete.
Made in China R02 Page 2 of 3
Customer Service 800.967.6696 | www.crateandbarrel.com
Loading...