Crate & Barrel Soleil Dining Table Assembly Instruction
SOLEIL 48” DINING TABLE
HARDWARE
Thank you for purchasing the Soleil 48” Dining Table.
This page lists all the contents included in the box.
Please take time to identify the hardware as well as the
individual components of this product. As you unpack
and prepare for assembly, place the contents on a
carpeted or padded area to protect them from damage.
Note: 2 people are required to safely assemble this product.
COMPONENTS
1 - small bolt 8 - large bolts
Missing hardware? Please call 800.606.6387
for replacements.
8 - washers
TOOLS REQUIRED
allen wrench (included)
top leg
frame
1 - tabletop
1 - bottom leg
frame
1 - top leg
frame
Made in China - r04 Page 1 of 2
Customer Service 800.967.6696 | www.crateandbarrel.com
1 Fit top leg frame into notch of bottom leg frame as
shown.
bottom leg
frame
SOLEIL 48” DINING TABLE
2 With the assistance of another adult, carefully place
tabletop face down onto a clean, padded surface. Position holes of leg frames over corresponding holes of
tabletop. Attach top and bottom leg frames to tabletop
with 8 long bolts and 8 washers. Secure bolts with an
allen wrench. NOTE: Tighten each bolt a few revolutions at a
time, applying equal pressure to all bolt joints. Repeat until all
bolts are tight. Do not over-tighten. Over-tightening may strip
bolts.
3 Secure top and bottom leg frames with 1 small
bolt as shown, using an allen wrench. With the
assistance of another adult, carefully position unit
upright.
Assembly is now complete.
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth.
Do not use abrasive cleaners.
Made in China - r04 Page 2 of 2
Customer Service 800.967.6696 | www.crateandbarrel.com
Loading...