Crate & Barrel SOLEIL 28 BISTRO TABLE Assembly Instruction

SOLEIL 28" BISTRO TABLE

Thank you for purchasing the Soleil 28" Bistro Table.
This page lists all the contents included in the box.
Please take time to identify the hardware as well as the
individual components of this product. As you unpack
and prepare for assembly, place the contents on a
carpeted or padded area to protect them from damage.
NOTE: Two people are required to assemble this
product safely.

TOOLS REQUIRED

1 - Allen wrench (included)

HARDWARE

Missing hardware? Please call

800.606.6387 for replacements.

4 - bolts

4 - washers

COMPONENTS

1 - tabletop

1 - top
leg frame

1 - bottom
leg frame

CARE & CLEANING

Use mild soap and water to clean the tabletop & base. Do not
use abrasive cleaners or materials. For stain protection of the
table top, use a sealer designed for clay products.

top leg frame

bottom leg frame

2 With the assistance of another adult, place the tabletop
upside down on a non-abrasive surface. Position holes in
legs over corresponding holes in table top. Attach legs to
table top with 4 bolts and 4 washers. Secure bolts with an

1 Fit slot of top leg frame into slot of bottom leg
frame as shown.

Made in China - r04 Page 1 of 1

allen wrench provided. NOTE: Tighten each bolt a few

revolutions at a time, applying equal pressure to all bolt joints.
Repeat until all bolts are tight. Do not over-tighten. Over-tightening
may strip bolts.

Assembly is now complete.