Crate & Barrel Skye Rectangular Coffee Table Assembly Instruction
SKYE RECTANGULAR COFFEE TABLE
HARDWARE
Thank you for purchasing the Skye Rectangular Coffee
Table. This page lists all the contents included in the
box. Please take time to identify the hardware as well as
the individual components of this product. As you
unpack and prepare for assembly, place the contents on
a carpeted or padded area to protect them from damage.
Note: 2 people are required to safely assembly this product.
COMPONENTS
8 - small bolts 14 - large bolts
Missing hardware?
Please call 800.606.6387 for replacements.
TOOLS REQUIRED
allen wrench
(included)
ASSEMBLY
NOTE: Make sure remaining
holes of connecting plate
face in toward leg bracket
4 - feet
connecting
plate
1 - tabletop
NOTE: Do not
over tighten bolts.
NOTE: Make sure to center
connection plate before
securing to leg frame
1 - crossbar
leg frame
leg bracket
2 - leg
frames
4 - connecting
plate
1 Attach 2 connecting plates to leg frame with 2 small
bolts per plate as shown. Make sure remaining holes of
connecting plate face in toward leg bracket. Repeat for
remaining leg frame.
Made in China - r03 Page 1 of 3
Customer Service 800.967.6696 | Latest instructions availabel at www.crateandbarrel.com
SKYE RECTANGULAR COFFEE TABLE
leg
frame
crossbar
A
leg
bracket
NOTE: Make sure
connecting plates face
in toward crossbar
2 A) Position leg frames as shown. Fit crossbar
into leg brackets of leg frames as shown, align
holes. Make sure connecting plates on leg
frames face in toward crossbar.
B) Secure crossbar to leg frames with 2 large
bolts using an allen wrench. Do not over tighten
the bolts.
B
leg
frame
B
foot
A
3 A) With the assistance of another adult, place
tabletop onto a clean, padded surface. Attach leg
frame assembly to tabletop with 6 large bolts per
side as shown, using an allen wrench. Make sure
each leg frame is flush on both sides with table edge
before securing bolts.
B) Attach 4 feet to leg frames as shown. Turn each
foot clockwise to secure. Position unit upright.
Assembly is now complete.
leg frame
assembly
A
tabletop
NOTE: Make sure each leg frame is
flush on both sides with table edge
before securing bolts
Made in China - r03 Page 2 of 3
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
Loading...