Crate & Barrel Ronan Bed Assembly Instruction

RONAN FULL, QUEEN OR KING BED

Thank you for purchasing the Ronan Full, Queen or King
Bed. This page lists all the contents included in the box.

Please take time to identify the hardware as well as the
individual components of this product. As you unpack
and prepare for assembly, place the contents on a
carpeted or padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

HARDWARE

8 - threaded
connectors

8 - side
rail hex
nuts

6 - slat
bolts

6 - slat hex
nuts

Missing hardware?
Please call 800.606.6387 for replacements.

16 - wood
dowels

2 - small
support leg
bolts

8 - brackets

3 - large
support leg
bolts

TOOLS REQUIRED

phillips head screwdriver
(not included)

allen wrench (included)

hex wrench (included)

(We recommend the use of hand tools instead of power tools)

6 - washers

COMPONENTS

1 - headboard 1 - footboard

1 - slat
assembly

2 - side rails

(1 left, 1 right)

1 - center
support rail

3 - support
legs

Made in Indonesia - r06 Page 1 of 3

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

RONAN FULL, QUEEN OR KING BED

NOTE: Do not fully
tighten threaded
connectors. Make sure
to leave 1 1/4 - 1 3/8”
of connector extended.

A

headboard

footboard

B

1 A) Insert 8 wood dowels and 4 threaded connectors
into headboard as shown. Turn connector clockwise 3-5
times to secure, leaving 1 1/4- 1 3/8” extended.
B) Insert 8 wood dowels and 4 threaded connectors into
footboard as shown. Turn connector clockwise 3-5 times
to secure, leaving 1 1/4 - 1 3/8” extended.

NOTE: Do not over
tighten the bolts

center
support rail

support
leg

2 Fit pre-installed dowels of 3 support legs into
corresponding holes of center support rail as shown.
Secure each leg with 1 large support leg bolt, using an
allen wrench. Do not over tighten the bolts.

3 A) With the assistance of another adult, fit dowels of headboard
into corresponding holes of left and right side rails. Secure left and

right side rails to headboard with 2 brackets and 2 side rail hex
nuts per side as shown, using a hex wrench. Do not over tighten.

B) Repeat step 3A for footboard.

NOTE: Make sure
each bracket is
assembled as shown

left side
rail

side rail

hex nut

bracket

A

headboard

right side
rail

footboard

B

Made in Indonesia - r06 Page 2 of 3

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com