Crate & Barrel Rolling Desk Chair Assembly Instruction

ROLLING DESK CHAIR

HARDWARE

Thank you for purchasing the Rolling Desk Chair. This
page lists all the contents included in the box. Please
take time to identify the hardware as well as the
individual components of this product. As you unpack
and prepare for assembly, place the contents on a
carpeted or padded area to protect them from damage.

COMPONENTS

4 - spring
washers

Missing hardware?
Please call 800.606.6387 for replacements.

TOOLS REQUIRED

allen wrench (included)

NOTE: Do not over
tighten the wheels

4- bolts4 - flat

washers

hex wrench (included)

5 - wheels

wheel

1 - seat

1 - base 1 - gaslift

Made in China - r03 Page 1 of 2

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

1 - seat
mechanism

base

1 Place base upside down onto a clean, padded surface
as shown. Fit 5 wheels into corresponding holes of base
as shown. Secure, but do not over tigthen, wheels with a

hex wrench.

ROLLING DESK CHAIR

bolt

spring washer
flat washer

FRONT

seat

2 Attach seat mechanism to seat with 4 bolts, 4 spring
washers, and 4 flat washers as shown. Make sure
mechanism is positioned as shown. Secure, but do not
over tighten, bolts with an allen wrench.

gas
lift

3 Fit bottom of gas lift into hole of base as shown.

CLEANING AND CARE

Clean surfaces with a dry or damp soft cloth.
Do not use abrasive cleaners.

4 Fit top of gas lift into corresponding hole on the
bottom of the seat assembly as shown.

NOTE: Finalize assembly by sitting heavily on the chair
a few times. This will secure all the component
connections.

Made in China - r03 Page 2 of 2

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com