QUBE 2-SECTION
HARDWARE
Thank you for purchasing the Qube 2-Section. This
page lists all the contents included in the box. Please
take time to identify the hardware as well as the
individual components of this product. As you unpack
and prepare for assembly, place the contents on a
carpeted or padded area to protect them from damage.
Note: 2 people are required to safely assemble this product.
COMPONENTS
12 - cams 12 - cam
screws
1 - bracket
1 - magnet
6 - small
screws
2 - medium
screws
2 - door
hinges
Missing hardware?
Please call 800.606.6387 for replacements.
TOOLS REQUIRED
phillips head screwdriver
(We recommend the use of hand tools instead of power tools)
NOTE: Do not over
tighten the cam screws
8 - large
screws
2 - side panels
(1 left, 1 right)
top
panel
1 - top panel
1 - bottom panel
1 - shelf
1 - back panel
bottom
panel
1 Insert 4 cam screws into top and bottom panels as
4 - feet
1 - door
shown. Secure, but do not over tighten, cam screws using
a phillips head screwdriver.
Made in China - r05 Page 1 of 3
Customer Service 800.967.6696 | Latest instructions avaliable at www.crateandbarrel.com
QUBE 2-SECTION
NOTE: Make sure arrows
on each cam point toward
nearest edge with holes
shelf
A
left and right
side panels
B
magnet
shelf
2 A) Insert 4 cams into 1 shelf as shown. Make sure
arrows on each cam point toward nearest edge with
holes.
B) Insert 4 cams and 2 cam screws into left and right
side panels as shown.
left side
panel
NOTE: Make sure
magnet faces out as
shown
3 Attach 1 magnet to shelf with 2 medium screws as
shown, using a phillips head screwdriver. Do not over
tighten the screws.
back
panel
right side
panel
4 Fit cam screws of left and right side panel into
corresponding holes of shelf as shown. Using a phillips
head screwdriver, turn cams clockwise until each cam
5 Slide back panel into corresponding grooves of
assembled unit.
securely engages each cam screw.
Made in China - r05 Page 2 of 3
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
QUBE 2-SECTION
bracket
B
A
door hinge
door
6 A) Attach 2 door hinges to door with 2 small screws
per hinge as shown, using a screwdriver.
B) Attach 1 bracket to door with 2 small screws as
shown.
door front
A
B
bottom
panel
foot
bottom
panel
7 Attach 4 feet to bottom panel with 2 large screws per
foot as shown, using a screwdriver.
top panel
8 A) Fit pegs of door hinge into corresponding hole of
assembled unit and bottom panel.
B) With the assistance of another adult, fit cam screws of
bottom panel into corresponding holes of assembled unit.
Secure all cams.
CLEANING AND CARE
Made in China - r05
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Do not
use furniture wax or polish as the wood is finished with a protective clear lacquer.
9 Fit cam screws of top panel into corresponding
holes of assembled unit as shown. Secure all cams.
Assembly is now complete.
Page 3 of 3
Loading...