Crate & Barrel Quartz Office Chair Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com

QUARTZ OFFICE CHAIR

B

A

1 A. Firmly press fit small
end of lift cylinder into
corresponding hole on the
underside of the seat
assembly.
B. Fit larger end of lift
cylinder into the center hole
of the base.
C. Firmly press fit the stems
of 5 casters into holes on
the underside of the base.

IMPORTANT NOTE:
Finalize assembly by
sitting heavily on the chair
a few times. This will
secure all the component
connections.

C

Thank you for purchasing the Quartz Office Chair.
This page lists all the contents included in the box.
Please take time to identify the hardware as well as
the individual components of this product. As you
unpack and prepare for assembly, place the
contents on a carpeted or padded area to protect
them from damage.

Made in China - r01

COMPONENTS

1 - seat assembly

1 - base

Missing hardware? Please call 800.606.6387 for replacements.

1 - lift cylinder

5 - casters

SEAT HEIGHT ADJUSTMENT:

While sitting in the chair,
pull the lever up to lower the seat.
To raise the seat, take your weight
off the chair and pull the lever up.

CLEANING AND CARE

Clean surfaces with a dry or damp soft cloth.
Do not use abrasive cleaners.

Page 1 of 1