Crate & Barrel Quartz Desk Assembly Instruction
Customer Service 800-967-6696 | http://www.crateandbarrel.com
QUARTZ DESK
Thank you for purchasing the Quartz Desk. This page lists
all the contents included in the box. Please take the time to
identify the hardware as well as the individual components
to this product. As you unpack and prepare for assembly,
place the contents on a carpeted or padded area to protect
them from damage.
Note: 2 people are required to safely assemble this product.
COMPONENTS
1 - top back crossbar 1 - top front crossbar 1 - bottom crossbar
Made in China R04
1 - right side frame 1 - glass panel1 - left side frame
HARDWARE
6 - small screws
Missing hardware?
Please call
800.606.6387 for replacements.
TOOLS REQUIRED
Allen wrench (included)
4 - feet
1 - washer1 - wing nut
1 - connecting
screw and wire
6 - pads
Page 1 of 3
Customer Service 800-967-6696 | http://www.crateandbarrel.com
QUARTZ DESK
Attach both left and right side frames to top back
1
crossbar, top front crossbar, and bottom crossbar,
using 3 small screws at each end. Secure each screw
with the Allen wrench.
Insert wire hook into lower hole only
Hook wire into the 2 holes located underneath the
3
top back crossbar as illustrated. Make sure to
insert wire hook through the lower hole only.
Made in China R04
x6
x2
Fit 4 feet into the holes on the bottom of
2
the assembled unit.
With the assistance of another adult, lay assembled
4
unit on its side. Insert connecting screw into bottom
crossbar. As illustrated, slide 1 washer onto screw
and secure with 1 wing nut.
Page 2 of 3
Loading...