Crate & Barrel Quantum Drop Leaf Table Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com

QUANTUM DROP-LEAF TABLE

Thank you for purchasing the Quantum Drop Leaf Table.
This page lists all the contents included in the box.
Please take time to identify the hardware as well as the
individual components of this product. As you unpack
and prepare for assembly, place the contents on a
carpeted or padded area to protect
them from damage.
Note: 2 people are required to safely assemble this
product.

COMPONENTS

1 - center tabletop

2 - drop leaf
panels

Pin

1 - leg assembly B

1 - leg assembly A

Made in Canada - r01

HARDWARE

16 - wood
screws

1 - hex nut

Missing hardware? Please call 800.606.6387 for
replacements.

24 - oval
head screws

4 - hinges

1 - bolt

TOOLS REQUIRED

Phillips head screwdriver

x 4

1 A. Place center tabletop on a clean, padded surface.
Align 2 drop leaf panels with center top and position 4
hinges over the pre-drilled holes. NOTE: The small side of
the hinge must be attached to the center top.
B. Attach hinges with 6 oval head screws per hinge and
secure with a phillips head screwdriver.

Page 1 of 2

Customer Service 800-967-6696 | http://www.crateandbarrel.com

QUANTUM DROP-LEAF TABLE

Make sure pin of
leg frame A fits into
hole of leg frame B

A

2 A. Slip leg assembly A through leg assembly B as
illustrated. Make sure the pin of leg A fits into the hole on
leg B.
B. Secure the 2 leg assemblies together with 1 bolt and 1

hex nut. Tighten with a phillips head screwdriver.

EXTENDING THE DROP-LEAVES:

4 A. Lift the leaf table tops to the same level as the
center tabletop.
B. Reach under and pull slide bars out to maximum
extension under each leaf.
C. Gently release leaves to rest on slide bars.

Made in Canada - r01

VIEW FROM
BELOW

B

A

B

x 16

3 Place leg assembly into position over pre-drilled holes
in tabletop. Loosely insert 4 wood screws per leg.
After the base is in its final position, fully tighten all wood
screws with a phillips head screwdriver.
With the assistance of another adult, lift table upright.
Assembly is now complete.

CLEANING AND CARE

Clean surfaces with a dry or damp soft cloth.
Do not use abrasive cleaners.

CAUTION: Do not sit or stand on the table. Total weight
capacity not to exceed 75 lbs.

Page 2 of 2