Crate & Barrel Quantum Dining Table Assembly Instruction
Customer Service 800-967-6696 | http://www.crateandbarrel.com
QUANTUM BISTRO TABLE
Thank you for purchasing the Quantum Bistro
Table. This page lists all the contents included
in the box. Please take time to identify the
hardware as well as the individual components
of this product. As you unpack and prepare for
assembly, place the contents on a carpeted or
padded area to protect them from damage.
Note: 2 people are required to safely assemble
this product.
COMPONENTS
1 - table top
1 - leg assembly A
1 - leg assembly B
Made in Canada - r05
HARDWARE
16 - wood
screws
2 - hex nuts
Missing hardware? Please call 800.606.6387 for
replacements.
2 - bolts
TOOLS REQUIRED
Phillips head screwdriver
1 Slip leg assembly B through leg assembly A as
shown.
Page 1 of 2
Customer Service 800-967-6696 | http://www.crateandbarrel.com
QUANTUM BISTRO TABLE
NOTE:
Do not over
tighten bolts
2 Secure the 2 leg assemblies together with 2 bolts
and 2 hex nuts. Secure each bolt with a phillips head
screwdriver, but do not over tighten.
Made in Canada - r05
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth.
Do not use abrasive cleaners.
3 Place leg assembly into position over pre-drilled holes
in table top. Loosely insert 4 wood screws per leg.
After the base is in its final position, fully tighten all wood
screws with a phillips head screwdriver.
With the assistance of another adult, lift table upright.
Assembly is now complete.
Page 2 of 2
Loading...