Crate & Barrel Onyx Personal Table Assembly Instruction

ONYX PERSONAL TABLE

HARDWARE

Thank you for purchasing the Onyx Personal Table. This
page lists all the contents included in the box. Please
take time to identify the hardware as well as the individual
components of this product. As you unpack and prepare
for assembly, place the contents on a carpeted or
padded area to protect them from damage.

COMPONENTS

8 - cams

Missing hardware? Please call

800.606.6387 for replacements.

8 - wood
dowels

TOOLS

Allen wrench (included)

Phillips head screwdriver

8- cam
screws

8 - bolts

1 - top frame

4 - legs

1 - glass top

1 - glass shelf

Made in China R04 Page 1 of 2

2 - right
& left crossbars

2 - front
& back crossbars

Customer Service 800.967.6696 | www.crateandbarrel.com

1 Insert 2 cams into the left crossbar, right cross-
bar, front crossbar, and back crossbar. Make sure
arrow on each cam points out towards holes.

ONYX PERSONAL TABLE

2 Insert 2 wood dowels and 2 cam screws into
each leg as shown. Secure cam screws with a

Phillips head screwdriver, but do not overtighten.

B

A

3 A) Fit dowels and cam screws of 4 legs into
corresponding holes on all crossbars, as shown
above.
B) Turn each cam clockwise with a Phillips head
screwdriver until each cam securely engages each
cam screw.

5 With the assistance of another adult, turn table
assembly upright. Carefully insert 1 glass top and 1
glass shelf onto recessed ledges on each frame.

4 Place top frame face down on a padded surface.
Secure leg assembly onto top frame with 8 bolts.
Tighten bolts with an Allen wrench, but do not
overtighten.

Made in China R04 Page 2 of 2

Customer Service 800.967.6696 | www.crateandbarrel.com

Assembly is now complete.

CLEANING AND CARE

Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. Do not use furniture wax or polish as the
wood is finished with a protective clear lacquer.