Crate & Barrel Octave Panel Nightstand Set of Two Assembly Instruction

OCTAVE PANEL BED NIGHTSTAND S/2

HARDWARE

Thank you for purchasing the Octave Panel Bed Night­stand s/2. This page lists all the contents included in the

box. Please take time to identify the hardware as well as
the individual components of this product. As you
unpack and prepare for assembly, place the contents on
a carpeted or padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

COMPONENTS

40 - small
bolts

8 - flat
washers

8 - large
bolts

4 - back panel
brackets

Missing hardware?
Please call 800.606.6387 for replacements.

TOOLS REQUIRED

allen wrench (included)

NOTE: Do not over
tighten the bolts

48 - spring
washers

2 - corner
brackets

2 - back panels
(1 right, 1 left)

2 - nightstand
assemblies
(1 left, 1 right)

left and right
back panel

corner
bracket

1 Attach 2 corner brackets to left and right back
panel with 4 small bolts and 4 spring washers per
bracket as shown. Secure, but do not over tighten, bolts

1 - bed assembly
(not included)

Made in Vietnam - r05 Page 1 of 2

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

with an allen wrench.

OCTAVE PANEL BED NIGHTSTAND S/2

left nightstand
assembly

corner
bracket

left back
panel

2 Attach left nightstand assembly to left back panel
with 2 small bolts and 2 spring washers as shown,
using an allen wrench.

left nightstand
assembly

left back panel

3 Position assembled unit as shown. Secure left back

panel to left nightstand assembly with 4 large bolts, 4
flat washers and 4 spring washers per side as shown.

Repeat steps 2-3 for right nightstand assembly.

4 With assistance of another adult, attach left and right
nightstand assemblies to headboard of bed assembly

with 4 back panel brackets. Do not adjust levelers until
brackets are fully attached. Loosely secure each back
panel bracket with 7 small bolts and 7 spring washers as
shown. Once all bolts have been loosely attached, fully
tighten all bolts. At this point, adjust levelers on headboard
as necessary.
Assembly is now complete.

bed
assembly

right nightstand
assembly

NOTE: Do not adjust
levelers until brackets
are fully attached

headboard

back
panel
bracket

left nightstand
assembly

CLEANING AND CARE

Clean surfaces with a dry or damp soft cloth.
Do not use abrasive cleaners.

Made in Vietnam - r05 Page 2 of 2

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com