Crate & Barrel Octave Panel Bed Full Assembly Instruction
OCTAVE PANEL BED FULL
HARDWARE
Thank you for purchasing the Octave Panel Bed Full.
This page lists all the contents included in the box.
Please take time to identify the hardware as well as the
individual components of this product. As you unpack
and prepare for assembly, place the contents on a
carpeted or padded area to protect them from damage.
Note: 2 people are required to safely assemble this product.
COMPONENTS
BOX 1
1 - headboard
36 - spring
washers
13 - center
slat caps
Missing hardware?
Please call 800.606.6387 for replacements.
TOOLS REQUIRED
allen wrench (included)
NOTE: Do not over
tighten the bolts
30 - small
bolts
6 - large
bolts
26 - end
slat caps
bracket
COMPONENTS
BOX 2
1 - foot rail
2 - side rails
(1 right, 1 left)
2 - headboard
side frames
(1 left, 1 right;
brackets pre-assembled)
Made in Vietnam - r06 Page 1 of 3
2 - support legs
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
1 - center
rail
26 - slats
right
headboard
side frame
headboard
1 Attach pre-assembled brackets of left and right
headboard side frames to headboard as shown. Secure
each bracket with 4 small bolts and 4 spring washers
as shown. Secure, but do not over tighten, bolts with an
allen wrench.
left
headboard
side frame
OCTAVE PANEL BED FULL
A
B
center
rail
support
leg
support
leg
2 Attach 2 support legs to center rail with 2 small
bolts and 2 spring washers per leg as shown, using an
allen wrench.
A
headboard
B
B
A
foot rail
A
left side
rail
B
A
right side
rail
3 A) With assistance of another adult, attach left and right
side rails to foot rail with 2 small bolts and 2 spring
washers per rail as shown.
B) Attach center rail to foot rail with 2 small bolts and 2
spring washers as shown.
NOTE: Make sure the
slats bow upwards.
end slat
cap
center
rail
slat
A
right side
rail
A
center
left side
rail
4 A) With assistance of another adult, attach left and
right side rails to headboard with 2 small bolts, 2 large
bolts and 4 spring washers per rail as shown.
B) Attach center rail to headboard with 2 large bolts and
2 spring washers as shown. At this point, adjust levelers
on headboard side frames as necessary.
Made in Vietnam - r06 Page 2 of 3
rail
B
5 A) Insert 26 slats into 26 end slat caps as shown.
Make sure slat bows upwards as shown.
B) Insert 13 center slat caps into corresponding holes in
center rail as shown.
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
center slat
cap
Loading...