Crate & Barrel Octave Nightstand Assembly Instruction

OCTAVE NIGHTSTAND

HARDWARE

Thank you for purchasing the Octave Nightstand. This
page lists all the contents included in the box. Please
take time to identify the hardware as well as the individual
components of this product. As you unpack and prepare
for assembly, place the contents on a carpeted or
padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

COMPONENTS

8 - large
screws

14 - flat
washers

16 - small
screws

14 - spring
washers

6 - small
bolts

4 - pull
bolts

Missing hardware?
Please call 800.606.6387 for replacements.

TOOLS REQUIRED

phillips head screwdriver

(We recommend the use of hand tools instead of power tools.)

8 - large
bolts

2 - pulls

1- top panel 1 - right partition1 - left partition

1 - back
panel

2 - drawer
bottoms

Made in Vietnam - r03 Page 1 of 3

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

2 - drawer
fronts

2 - side panels
(1 right, 1 left)

1 - bottom
panel

2 - drawer
backs

1 - leg assembly

4 - drawer sides
(2 right, 2 left)

OCTAVE NIGHTSTAND

NOTE: Do not over
tighten the bolts

back

B

panel

large bolt

spring washer

flat washer

A

A

left side panel

left partition

top panel

1 A) Fit pre-assembled dowels of side panels and
partitions into corresponding holes of top panel as shown.
Using a phillips head screwdriver, secure each panel with
2 large bolts, 2 spring washers and 2 flat washers as
shown. Do not over tighten the bolts.
B) Fit back panel into grooves of assembled unit as shown.

right partition

right side panel

NOTE: Do not over
tighten the screws

bottom panel

2 Fit dowels of assembled unit into corresponding
holes of bottom panel as shown. Secure, but do not
over tighten with 8 large screws, using a screwdriver.

small bolt

spring washer

flat washer

leg
assembly

3 With the assistance of another adult, attach leg
assembly to bottom of assembled unit with 6 small bolts,
6 spring washers and 6 flat washers as shown. Secure
bolts with a screwdriver.

A

B

drawer
back

drawer left
side

NOTE: Make
sure wheels are
at the back

A

drawer
bottom

4 A) Fit drawer bottom into grooves of drawer back and
drawer front as shown. Fit dowels of drawer assembly
into corresponding holes of drawer sides. Secure with
4 small screws per side, using a screwdriver.
B) Attach 1 pull to drawer front with 2 pull bolts, using
a screwdriver.

Repeat step 4A-B for remaining drawer assembly.

drawer right
side

B

pull

drawer
front

Made in Vietnam - r03 Page 2 of 3

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com