OCTAVE FOUR DRAWER CHEST
HARDWARE
Thank you for purchasing the Octave Four Drawer
Chest. This page lists all the contents included in the
box. Please take time to identify the hardware as well as
the individual components of this product. As you
unpack and prepare for assembly, place the contents on
a carpeted or padded area to protect them from damage.
Note: 2 people are required to safely assemble this product.
COMPONENTS
48 - screws
20 - flat
washers
4 - bottom
screws
20 - spring
washers
8 - small
bolts
16 - pull
bolts
8 - medium
bolts
8 - pulls
Missing hardware?
Please call 800.606.6387 for replacements.
TOOLS REQUIRED
phillips head screwdriver
(We recommend the use of hand tools instead of power tools.)
4 - large
bolts
1- top panel 1 - partition
1 - back
panel
4 - drawer
crossbars
Made in Vietnam - r04 Page 1 of 3
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
1 - leg assembly
4 - drawer
bottoms
1 - bottom
panel
1 - top
drawer front
3 - drawer
fronts
1 - top
drawer back
3 - drawer
backs
2 - side panels
(1 right, 1 left)
2 - top drawer sides
(1 right, 1 left)
6 - drawer sides
(3 right, 3 left)
OCTAVE FOUR DRAWER CHEST
medium bolt
spring washer
flat washer
B
partition
B
NOTE: Do not over
tighten the bolts
right side
panel
A
back
panel
1 A) With the assistance of another adult, fit back panel
into grooves of right side panel as shown.
B) Fit pre-assembled dowels of partition into corresponding
holes of right side panel as shown. Using a phillips head
screwdriver, secure right side panel with 2 medium bolts,
2 spring washers and 2 flat washers as shown. Do not
over tighten the bolts.
medium bolt
spring washer
flat washer
B
partition
B
left side
panel
back
panel
A
2 A) Fit back panel into grooves of left side panel as
shown.
B) Fit dowels of partition into corresponding holes of left
side panel and secure with 2 medium bolts, 2 spring
washers and 2 flat washers as shown.
large bolt
NOTE: Do not over
tighten the screws
A
bottom
screw
B
spring washer
flat washer
A
B
3 A) Fit dowels of assembled unit into corresponding
holes of bottom panel as shown. Secure, but do not
over tighten with 4 bottom screws, using a screwdriver.
B) Secure bottom panel to back panel from inside with 2
large bolts, 2 spring washers and 2 flat washers.
bottom panel
medium bolt
A
spring washer
B
flat washer
top panel
A
4 A) Fit dowels of assembled unit into corresponding
holes of top panel. Secure top panel with 4 medium
bolts, 4 spring washers and 4 flat washers as shown.
B) Secure top panel to back panel with 2 large bolts,
2 spring washers and 2 flat washers.
B
flat washer
spring washer
large bolt
Made in Vietnam - r04 Page 2 of 3
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
OCTAVE FOUR DRAWER CHEST
B
A
flat washer
spring washer
small bolt
leg
assembly
5 Attach leg assembly to bottom of assembled unit
with 8 small bolts, 8 spring washers and 8 flat washers
as shown. Secure bolts with a screwdriver. With the
assistance of another adult, carefully position unit upright.
top drawer
right side
top drawer
back
drawer
top drawer
left side
bottom
B
pull
top drawer
front
C
A
NOTE: Make
sure wheels are
at the back
6 A) Fit drawer bottom into grooves of drawer back and
top drawer front as shown. Fit dowels of drawer assembly
into corresponding holes of top drawer sides. Secure with
4 screws per side, using a screwdriver.
B) Attach crossbar to drawer assembly with 4 screws.
C) Attach 2 pulls to top drawer front with 2 pull bolts per
pull, using a screwdriver.
crossbar
A
drawer
NOTE: Make
sure wheels are
at the back
drawer left
side
7 A) Fit drawer bottom into grooves of drawer back and
drawer front as shown. Fit dowels of drawer assembly
into corresponding holes of drawer sides. Secure with
4 screws per side, using a screwdriver.
B) Attach crossbar to drawer assembly with 4 screws.
C) Attach 2 pulls to drawer front with 2 pull bolts per bolt
using a screwdriver.
Repeat step 7A-C for remaining drawer assembly.
Made in Vietnam - r04 Page 3 of 3
back
B
drawer right
side
drawer
bottom
pull
drawer
front
C
crossbar
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
8 Insert drawer assembly into the case, fitting wheels
of drawer glide into rail of case glides.
Repeat step 8 for remaining drawer assembly.
Assembly is now complete.
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. Do not use furniture wax or polish as the
unit is finished with a protective clear lacquer. It is
recommended to use coasters to protect surface from heat
and water.
Loading...