Crate & Barrel Notch Office Chair Assembly Instruction

NOTCH OFFICE CHAIR

HARDWARE

Thank you for purchasing the Notch Office Chair. This
page lists all the contents included in the box. Please
take time to identify the hardware as well as the
individual components of this product. As you unpack
and prepare for assembly, place the contents on a
carpeted or padded area to protect them from damage.

COMPONENTS

4 - spring
washers

Missing hardware?
Please call 800.606.6387 for replacements.

washers

4 - plastic
washers

TOOLS REQUIRED

allen wrench (included)

4- bolts4 - metal

1 - seat

1 - base 1 - gaslift

Made in China - r03 Page 1 of 2

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

1 - seat
mechanism

seat

1 Place seat upside down onto a clean, padded surface
as shown. Fit 4 plastic washers over corresponding
holes of seat as shown.

NOTCH OFFICE CHAIR

bolt

spring washer

gas
lift

metal washer

FRONT

2 Attach seat mechanism to seat with 4 bolts, 4 spring
washers, and 4 metal washers as shown. Make sure
arrow on mechanism points toward the front edge of the
seat. Secure, but do not over tighten, with an allen
wrench.

VIEW FROM
BELOW

NOTE: Make
sure arrow on
mechanism points
towards front
edge of seat

base

3 Fit bottom of gas lift into hole of base as shown.

OPERATING

1

INSTRUCTIONS

2

1 HEIGHT ADJUSTMENT:

while sitting in the chair, pull the lever
up to lower the seat. To raise the seat,
take your weight off the chair and pull the lever up.

3

4

2 LOCKING THE SEAT:

While sitting in the chair, lean your weight forward and
push the lever in.

3 UNLOCKING THE SEAT:

While sitting in the chair, lean you weight forward and
pull the lever out.

4 ADJUSTING THE TENSION:

Tighten the knob to increase the back tension (less
rocking). Loosen the knob to decrease the back

5 Fit top of gas lift into corresponding hole on the
bottom of the seat assembly as shown.

NOTE: Finalize assembly by sitting heavily on the chair
a few times. This will secure all the component
connections.

Made in China - r03 Page 2 of 2

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

tensions (more rocking).

CLEANING AND CARE

Clean surfaces with a dry or damp soft cloth.
Do not use abrasive cleaners.