Crate & Barrel Newport Wall Mirror Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com

NEWPORT WALL MIRROR

Thank you for purchasing the Newport wall mirror.
This page lists all the contents included in the box.
Please take time to identify the hardware as well as the
individual components of this product. As you unpack
and prepare for assembly, place the contents on a
carpeted or padded area to protect them from damage.

HANGING THE MIRROR:

NOT E : T his m irror c an only be h ung
hor izon tally. Although basic wall mounting

hardware is included, be sure to use the
proper hardware for your wall type. When in
doubt, consult your local hardware store.

1 Determine desired location of mirror and
mark the center of the two anchors on the
wall. The anchors will be 31" apart,
horizontally.

screw

2 Drill two holes that are slightly smaller in
diameter than the anchor, but 1/4" deeper
than the length of the anchor.

3 Insert two anchors flush with the surface of
the wall. Gently tap with hammer if necessary.

4 Using screwdriver, secure the two screws
into the anchors leaving approximately 1/16"
of the screw head out from the wall as
illustrated.

5 Hang the mirror on the two screws.

Made in Vietnam 2004

HARDWARE

2 - anchors

2 - screws

TOOLS REQUIRED

Phillips head screwdriver

Electric drill and drill bit

Missing hardware? Please call 800.606.6387
for replacements.

CLEANING AND CARE

Clean wood surfaces with a damp cloth. Do not use
furniture wax or polish as the wood is finished with a
protective clear lacquer.

see step 4

1/16”

hole in wall

anchor

31”

mirror

Page 1 of 1