Crate & Barrel Motel Dining Table Assembly Instruction
MOTEL TABLE
HARDWARE
Thank you for purchasing the Motel Table. This page
lists all the contents included in the box. Please take
time to identify the hardware as well as the individual
components of this product. As you unpack and
prepare for assembly, place the contents on a carpeted
or padded area to protect them from damage.
Note: 2 people are required to safely assemble this product.
COMPONENTS
8 - barrel
nuts
Missing hardware? Please call
800.606.6387 for replacements.
8 - bolts
TOOLS REQUIRED
flathead
screwdriver
(We recommend the use of hand tools instead of power tools)
NOTE: Make sure bottom
of each connector ring
faces up as shown
allen wrench
(included)
2 - connector
rings
connector
ring
A
B
4 - legs
1 A) On a clean, padded surface, fit 4 legs into corresponding
notches of 2 connector rings as shown. Insert 4 barrel nuts into each
connector ring as shown. Using a flathead screwdriver, align holes
of each barrel nut with holes in connector rings.
1 - tabletop
Made in China - r01 Page 1 of 2
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
B) Secure legs to connector rings with 8 bolts as shown. Using an
allen wrench, make sure each bolt engages each barrel nut. Loosely
secure bolts.
leg
MOTEL TABLE
NOTE: Do not over
tighten the bolts
2 With the assistance of another adult, place tabletop
onto a clean, padded surface. Fit end of each leg into lip
of tabletop as shown. Make sure each leg is secure. At
this point, using an allen wrench, fully tighten all bolts.
Do not over tighten the bolts. Position assembled unit
upright.
Assembly is now complete.
tabletop
Made in China - r01
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do
not use abrasive cleaners. We recommend the use
of outdoor furniture covers during inclement
weather. Periodically tighten bolts as necessary.
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
Page 2 of 2
Loading...