Crate & Barrel Motel Chair Assembly Instruction

MOTEL CHAIR

HARDWARE

Thank you for purchasing the Motel Chair This page
lists all the contents included in the box. Please take
time to identify the hardware as well as the individual
components of this product. As you unpack and
prepare for assembly, place the contents on a carpeted
or padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

COMPONENTS

4 - small
bolts

2 - end
caps

4 - large
bolts

4 - plastic
spacers

16 - washers8 - nuts

Missing hardware? Please call

800.606.6387 for replacements.

TOOLS REQUIRED

hex wrench

(included)

(We recommend the use of hand tools instead of power tools)

allen wrench

(included)

seat
back

seat

1 - seat

2 - leg frame

(1 left, 1 right)

Made in China - r01 Page 1 of 2

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

1 - seat
back

1 - crossbar

1 Place seat and seat back onto a clean, padded
surface. Attach seat to seat back with 4 small bolts, 8
washers and 4 nuts as shown. Make sure bolts are
attached from the backside of seat back. Secure, but do
not over tighten the bolts and nuts, using an allen
wrench and a hex wrench.

MOTEL CHAIR

NOTE: Do not
fully tighten bolts

large bolt

washer

right leg
frame

crossbar

2 Fit ends of crossbar into right leg frame as shown.

NOTE: Do not over
tighten the bolts

left leg

A

frame

plastic spacer

leg
assembly

washer
nut

seat assembly

3 With the assistance of another adult, attach leg assembly
to seat assembly. Loosely secure right leg frame to seat
assembly with 2 large bolts, 2 washers, 2 plastic spacers,
2 washers and 2 nuts as shown. Do not fully tighten bolts.

end cap

large bolt

washer

plastic
spacer

washer
nut

B

4 A) Fit end of crossbar into corresponding hole of left leg
frame.
B) Secure left leg frame to seat assembly with 2 large bolts, 2
washers, 2 plastic spacers, 2 washers and 2 nuts as shown.
At this point, fully tighten all bolts and nuts by turning an allen
wrench clockwise and a hex wrench counter clockwise.

Made in China - r01

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

5 Place assembled unit upright. Fit 2 end caps
into left and right leg frames as shown.
Assembly is now complete.

CLEANING AND CARE

Clean surfaces with a dry or damp soft cloth. Do
not use abrasive cleaners. We recommend the use
of outdoor furniture covers during inclement
weather. Periodically tighten bolts as necessary.

Page 2 of 2