Crate & Barrel Mosaic Side Table Assembly Instruction

MOSAIC SIDE TABLE

Thank you for purchasing the Mosaic Side Table.
This page lists all the contents included in the box.
Please take time to identify the hardware as well as the
individual components of this product. As you unpack
and prepare for assembly, place the contents on a
carpeted or padded area to protect them from damage.

HARDWARE

Missing hardware? Please call

800.606.6387 for replacements.

4 - bolts

COMPONENTS

1 - top
leg frame

TOOLS REQUIRED

allen wrench (included)

4 - washers

1 - tabletop

1 - bottom
leg frame

ASSEMBLY

A) Fit slot of bottom leg frame into slot of top leg
frame as shown.

B) Place the tabletop upside down onto a clean,
padded surface. Position holes in legs over
corresponding holes in tabletop. Loosely attach each
leg to tabletop with 1 bolt and 1 washer as shown. At
this point, fully secure all bolts with an allen wrench.
Do not over tighten the bolts.

Assembly is now complete

NOTE: Do not over tighten the bolts

CLEANING AND CARE

Use mild soap and water to clean the tabletop & base. Do
not use abrasive cleaners or materials. Immediately remove
liquid spills with an absorbent cloth to prevent staining. For
stain protection of the table top, use a sealer designed for

clay products. It is recommended to use coasters to protect

surface from heat and water. Cover the unit if left outdoors for
the winter. This is not a stool; please do not sit on table.

bottom
leg frame

A

top leg
frame

tabletop

B

B

Made in Vietnam - r06 Page 1 of 1

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com