Crate & Barrel Mix Console Table Assembly Instruction
MIX CONSOLE TABLE
HARDWARE
Thank you for purchasing the Mix Console Table. This
page lists all the contents included in the box. Please take
time to identify the hardware as well as the individual
components of this product. As you unpack and prepare for
assembly, place the contents on a carpeted or padded area
to protect them from damage.
ASSEMBLY
4 - hex
nuts
Missing hardware? Please call 800.606.6387 for replacements.
4 - flat
washers
20 - bumpers
COMPONENTS
4 - threaded rods
1 - glass top
(slightly larger than glass shelves)
2 - glass
shelves
2 - side frames
4 - caps
1 - top frame
TOOLS REQUIRED
socket wrench (included)
C
B
socket
wrench
B
1 A) Place top frame upside down on a clean, padded surface.
Insert 4 threaded rods into top frame as shown. Turn rods
clockwise to secure.
B) Fit legs of 1 side frame over corresponding rods, and secure
with 2 hex nuts and 2 flat washers, using a socket wrench.
Using your fingers, align edge of each leg with edge of top
frame. Repeat step 1B for remaining side frame.
C) Insert 1 cap into bottom of each leg as shown. Press firmly
to secure.
Made in China - r09 Page 1 of 1
A
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
A
bumper
glass
shelf
2 A) Position unit upright. Adhere 14 bumpers to corners of
frame assembly as shown.
B) Carefully lay glass top and shelves onto frame assembly as
shown. Make sure each glass top is securely supported by
each bumper.
Assembly is now complete.
CLEANING & CARE
Clean surfaces with a dry or damp soft cloth.
Do not use abrasive cleaners.
B
glass
top
glass
shelf
Loading...