Crate & Barrel Mimic Cube Assembly Instruction
MIMIC CUBE
HARDWARE
Thank you for purchasing the Mimic Cube. This page
lists all the contents included in the box. Please take
time to identify the hardware as well as the individual
components of this product. As you unpack and
prepare for assembly, place the contents on a carpeted
or padded area to protect them from damage.
COMPONENTS
10 - cam
screws
2 - connecting
screws
dowels
Missing hardware?
Please call 800.606.6387 for replacements.
10 - cams8 - wood
OPTIONAL WALL MOUNTING HARDWARE
1 - wall
strap
1 - screw
TOOLS REQUIRED
phillips head screwdriver
(We recommend the use of hand tools instead of power tools)
NOTE: Do not over
tighten the cam screws
1 - connecting
bracket
B
crossbars
A
left and right
side frames
2 - side frames
(1 left, 1 right)
1 - bottom panel
NOTE: Make sure arrow on
each cam points toward
nearest edge with holes
C
bottom panel
1 A) Insert 5 cam screws into left and right frames as
1 - glass top 2 - crossbars
Made in China - r04 Page 1 of 3
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
shown. Secure, but do not over tighten, with a phillips
head screwdriver.
B) Insert 2 cams into 2 crossbars as shown. Make sure
arrow on each cam points toward nearest edge with holes.
C) Insert 6 cams into bottom panel as shown.
MIMIC CUBE
NOTE: Make sure crossbars
face in during assembly
as shown
crossbar
A
crossbar
left side frame
B
bottom
panel
2 A) Fit dowels of left side frame into corresponding
holes of crossbars as shown. Using a screwdriver, turn
each cam clockwise until it securely engages each cam
screw.
B) Fit dowels of left side frame into corresponding holes
of bottom panel as shown. Secure all cams.
right side frame
3 Fit dowels of right side frame into corresponding
holes of assembled unit as shown. Secure all cams.
frame
glass top
4 Position assembled unit upright as shown. Carefully
place glass top into assembled unit as shown. Make
sure glass top is fully secured by frame.
Assembly is now complete.
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. Do not use furniture wax or polish as
the wood is finished with a protective clear lacquer.
Made in China - r04 Page 2 of 3
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
Loading...