Page 1
Mid-Century Spindle Conversion Bed Assembly Instructions
!
• Do not place near windows where cords from blinds or drapes may strangle a child.
• Do not place items with a string, cord or ribbon around a child’s neck, such as hood
strings or pacifier cords.
• Do not suspend strings over a bed for any reason.
• The intended mattress dimension on the bed are as follows:
Full: 53”-54”W x 74”-75”L
WARNING
CLEANINGANDCARE:
Cleansurfaceswithadryordampsoftcloth.Donotuseabrasivecleaners.
Periodically check and ensure that the components of this bed are in their proper position,
free from damage, and all connectors are tight.
Made in Vietnam - r04
800.967.6696 | crateandbarrel.com
Page 2
Mid-Century Spindle Conversion Bed Assembly Instructions
This page lists the contents included in the box. Please take
time to identify the hardware as well as the individual
components of the product. As you unpack and prepare for
assembly, place the contents on a carpeted or padded area
to protect them from damage. Please follow the assembly
instructions closely. Improper assembly can result in
personal or property damage.
Note: 2 adults are required to safely assemble this product.
WARNING:
CHOKING HAZARD - SMALL PARTS
Small parts present in unassembled state.
Adult assembly required.
NOTE: Hardware will be re-used from crib/toddler bed assembly
20 - Large bolts
*Provided with crib packaging
2 - Small bolt caps2 - Half-moon brackets
1 - Small Allen wrench 1 - Small Allen wrench
*Provided with crib packaging
2 - Small bolts 14 - Screws
2 - Flat washers
20 - Flat washers
(Pre-attached to large bolts)
*Provided with crib packaging
Phillips head screwdriver
(Not included)
2 - Spring washers
20 - Spring washers
(Pre-attached to large bolts)
*Provided with crib packaging
Made in Vietnam - r04
Page 1 of 6
800.967.6696 | crateandbarrel.com
Page 3
Mid-Century Spindle Conversion Bed Assembly Instructions
1 - Side panel
*Provided with
crib packaging
A
2 - Leg A
*Provided with
crib packaging
B
2 - Leg B
*Provided with
crib packaging
1 - Footboard
Made in Vietnam - r04
1 - Slat
assembly
2 - Side rails
Page 2 of 6
800.967.6696 | crateandbarrel.com
Page 4
Mid-Century Spindle Conversion Bed Assembly Instructions
1
A
side panel/
headboard
B
A
A
foot rail
B
(Pre-attached to large bolts)
Attach 1 leg A and 1 leg B to 1 side panel/headboard as shown. Using a small Allen wrench, secure each leg with 2 large
bolts, 2 spring washers and 2 flat washers as shown. Repeat steps for footboard. Do not over tighten the bolts.
headboard
assembly
2
Made in Vietnam - r04
With assistance of another adult, attach headboard assembly to 1 side rail with 3 large bolts, 3 spring washers and 3
flat washers as shown. Secure bolts with a small Allen wrench.
(Pre-attached to large bolts)
Page 3 of 6
800.967.6696 | crateandbarrel.com
Page 5
Mid-Century Spindle Conversion Bed Assembly Instructions
footboard
assembly
3
(Pre-attached to large bolts)
With assistance of another adult, attach footboard assembly to side rail with 2 large bolts, 2 spring washers and 2 flat
washers as shown.
At this point, insert 1 large bolt, 1 spring washer, 1 flat washer and 1 half-moon bracket into footboard assembly as
4
Made in Vietnam - r04
shown. Secure bolt with a small Allen wrench.
(Pre-attached to large bolts)
Page 4 of 6
800.967.6696 | crateandbarrel.com
Page 6
Mid-Century Spindle Conversion Bed Assembly Instructions
(Pre-attached to large bolts)
5
Attach remaining side panel to bed assembly and secure with 5 large bolts, 5 spring washers and 5 flat washers as shown.
(Pre-attached to
large bolts)
6
Made in Vietnam - r04
At this point, insert 1 large bolt, 1 spring washer, 1 flat washer and 1 half-moon bracket into footboard assembly as
shown. Secure bolt with a small Allen wrench.
Page 5 of 6
800.967.6696 | crateandbarrel.com
Page 7
Mid-Century Spindle Conversion Bed Assembly Instructions
7
Position bed assembly upright. Place slat assembly into bed assembly and secure with 14 screws as shown. Secure, but
do not over tighten, screws with a Phillips head screwdriver.
Insert 2 bolt caps into exposed holes of outside of headboard assembly as shown. Secure each bolt cap with 1 small
8
Made in Vietnam - r04
bolt, 1 spring washer and 1 flat washer, using 2 small Allen wrenches. Assembly is now complete.
Page 6 of 6
800.967.6696 | crateandbarrel.com
Loading...