Crate & Barrel Meridian Round Coffee Table Assembly Instruction

MERIDIAN ROUND COFFEE TABLE

HARDWARE

Thank you for purchasing the Meridian Round Coffee
Table. This page lists all the contents included in the

box. Please take time to identify the hardware as well
as the individual components of this product. As you
unpack and prepare for assembly, place the contents
on a carpeted or padded area to protect them from
damage.

Note: 2 people are required to safely assemble this product.

ASSEMBLY

NOTE: Do not fully
tighten the bolts
until directed

24 - washers

Missing hardware?
Please call 800. 606. 6387 for replacements.

8 -acorn
nuts

8 - short
bolts

COMPONENTS

4 - legs

1 - tabletop

1 - center
connector

1 - center
hole cap

TOOLS REQUIRED

1 - hex wrench
(included)

1 - allen wrench
(included)

8 - long
bolts

large bolt

washer

acorn nut

washer

1 With the assistance of another adult, place tabletop
upside down on a clean, padded surface. Loosely
attach each leg by inserting the hardware through each
of the 2 holes and the tabletop frame as shown. Do not
fully tighten the bolts.

Made in Vietnam - r03 Page 1 of 2

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

MERIDIAN ROUND COFFEE TABLE

center connecter

2 Align holes in center connector with holes in legs.
Loosely attach center connector to each leg as illustrated.
At this point, fully tighten all the bolts installed in steps 1-2
with the allen wrench and hex wrench provided.

center hole cap

3 With the assistance of another adult, place the
table upright. If not using an umbrella, conceal hole in
the tabletop with the center hole cap.
Assembly is now complete.

CLEANING & CARE

Clean surfaces with a dry or damp soft cloth. Do not
use abrasive cleaners.

Made in Vietnam - r03 Page 2 of 2

Customer Service 800.967.6696 | www.crateandbarrel.com