MERIDIAN 96” RECTANGULAR DINING TABLE
HARDWARE
Thank you for purchasing the Meridian 96” Rectangular Dining Table. This page lists all the contents
included in the box. Please take time to identify the
hardware as well as the individual components of this
product. As you unpack and prepare for assembly,
place the contents on a carpeted or padded area to
protect them from damage.
Note: 2 people are required to safely assemble this product.
ASSEMBLY
56 - washers 16 - long
Missing hardware?
Please call 800. 606. 6387 for replacements.
16 -acorn
nuts
24 - short
bolts
bolts
COMPONENTS
1 - center
hole cap
1 - tabletop
1 - center
connector
8 - legs
TOOLS REQUIRED
1 - hex wrench
(included)
1 - allen wrench
(included)
NOTE: Do not fully
tighten the bolts
until directed
acorn
nut
washer
large bolt
washer
1 With the assistance of another adult, place tabletop
upside down on a clean, padded surface. Loosely
attach each leg by inserting the hardware through each
of the 2 holes and the tabletop frame as shown. Do not
fully tighten the bolts.
Made in Vietnam - r02 Page 1 of 2
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
MERIDIAN 96” RECTANGULAR DINING TABLE
center connecter
2 Align holes in center connector with holes in legs.
Loosely attach center connector to each leg as illustrated.
At this point, fully tighten all the bolts installed in steps 1-2
with the allen wrench and hex wrench provided.
washer
small bolt
3 With the assistance of another adult, place the
table upright. If not using an umbrella, conceal hole in
the tabletop with the center hole cap.
Assembly is now complete.
center hole cap
CLEANING & CARE
Clean surfaces with a dry or
damp soft cloth. Do not use
abrasive cleaners. It is recommended to cover if left outdoors
for the winter..
Made in Vietnam - r02 Page 2 of 2
Customer Service 800.967.6696 | www.crateandbarrel.com
Loading...