Crate & Barrel Meridian 3-Pc. High Dining Ensemble, Meridian High Dining Table Assembly Instruction

MERIDIAN HIGH ROUND DINING TABLE

HARDWARE

Thank you for purchasing the Meridian High Round
Dining Table. This page lists all the contents included

in the box. Please take time to identify the hardware as
well as the individual components of this product. As
you unpack and prepare for assembly, place the
contents on a carpeted or padded area to protect them
from damage.

Note: 2 people are required to safely assemble this product.

ASSEMBLY

40 - washers

Missing hardware?
Please call 800. 606. 6387 for replacements.

8 -acorn
nuts

24 - short
bolts

COMPONENTS

4 - legs

1 - tabletop

2 - center
connector

1 - center
hole cap

TOOLS REQUIRED

1 - hex wrench
(included)

1 - allen wrench
(included)

8 - long
bolts

NOTE: Do not fully
tighten the bolts
until directed

large bolt

washer

nut

washer

1 With the assistance of another adult, place tabletop
upside down on a clean, padded surface. Loosely
attach each leg by inserting the hardware through each
of the 2 holes and the tabletop frame as shown. Do not
fully tighten the bolts.

Made in Vietnam - r02 Page 1 of 2

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

MERIDIAN HIGH ROUND DINING TABLE

center connecters

2 Align holes in center connectors with holes in legs.
Loosely attach both center connectors to each leg as
illustrated. At this point, fully tighten all the bolts installed in
steps 1-2 with the allen wrench and hex wrench provided.

center hole cap

3 With the assistance of another adult, place the
table upright. If not using an umbrella, conceal hole in
the tabletop with the center hole cap.
Assembly is now complete.

CLEANING & CARE

Clean surfaces with a dry or damp soft cloth. Do not
use abrasive cleaners. It is recommended to cover if left
outdoors for the winter.

Made in Vietnam - r02 Page 2 of 2

Customer Service 800.967.6696 | www.crateandbarrel.com