MERIDIAN CAFÉ TABLE
HARDWARE
Thank you for purchasing the Meridian Café Table.
This page lists all the contents included in the box.
Please take time to identify the hardware as well as the
individual components of this product. As you unpack
and prepare for assembly, place the contents on a
carpeted or padded area to protect them from damage.
Note: 2 people are required to safely assemble this product.
ASSEMBLY
28 - flat
washers
Missing hardware?
Please call 800. 606. 6387 for replacements.
8 -acorn
nuts
12 - small
bolts
COMPONENTS
4 - legs
1 - tabletop
1 - center
connector
TOOLS REQUIRED
1 - hex wrench
(included)
NOTE: Do not fully
tighten the bolts
1 - allen wrench
(included)
8 - large
bolts
1 - center
hole cap
leg
flat washer
acorn nut
1 With the assistance of another adult, place
tabletop upside down on a clean, padded
surface. Loosely attach each leg with 2 large
bolts, 4 flat washers and 2 acorn nuts as shown.
Do not fully tighten the bolts until further
instructions.
Made in Vietnam - r03 Page 1 of 2
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
large bolt
flat
washer
MERIDIAN CAFÉ TABLE
center
connector
flat washer
small bolt
2 Align holes in center connector with corresponding
holes in legs. Loosely attach center connector to each
leg with 3 small bolts and 3 flat washers as shown.
At this point, fully tighten large/small bolts with an allen
wrench and acorn nuts with a hex wrench. Do not over
tighten the bolts.
center hole cap
3 With the assistance of another adult, place the
table upright. If not using an umbrella, conceal hole in
the tabletop with the center hole cap.
Assembly is now complete.
CLEANING & CARE
Clean surfaces with a dry or damp soft cloth. If
necessary, clean with a soft bristle brush or microfiber
cloth. Do not use abrasive cleaners. Cover the unit if left
outdoors for the winter.
Made in Vietnam - r03 Page 2 of 2
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com