Crate & Barrel Mendocino Rectangular Dining Table Assembly Instruction

MENDOCINO RECTANGULAR DINING TABLE

HARDWARE

Thank you for purchasing the Mendocino Rectangular
Dining Table. This page lists all the contents included

in the box. Please take time to identify the hardware as
well as the individual components of this product. As
you unpack and prepare for assembly, place the
contents on a carpeted or padded area to protect them
from damage.

Note: 2 people are required to safely assemble this product.

NOTE: Do not over
tighten the nuts

leg

A

threaded
bolt

washer

nut

8 - washers 8 - nuts

1 - umbrella
cap

Missing hardware? Please call

800.606.6387 for replacements.

TOOLS REQUIRED

hex wrench

(included)

COMPONENTS

4 - legs1 - tabletop

1 A) With the assistance of another adult, place
tabletop onto a clean, padded surface. Fit
threaded bolts of 4 legs into corresponding holes
of tabletop. Secure each leg to tabletop with 2
washers and 2 nuts, using a hex wrench. Do not
over tighten the nuts.

B) Position assembled unit upright. Fit

umbrella cap into center hole of
tabletop as shown.

Assembly is now complete.

A

B

tabletop

CLEANING AND CARE

Made in Indonesia - r01 Page 1 of 1

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners.
Periodically tighten bolts as necessary.

umbrella
cap

center hole