Crate & Barrel Mendocino Bench Assembly Instruction

MENDOCINO BENCH

Thank you for purchasing the Mendocino Bench. This
page lists all the contents included in the box. Please
take time to identify the hardware as well as the
individual components of this product. As you unpack
and prepare for assembly, place the contents on a
carpeted or padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

HARDWARE

3 - large
bolts

6 - wood
plugs

Missing hardware? Please call

800.606.6387 for replacements.

4 - medium
bolts

1 - screw

2 - small
bolts

TOOLS REQUIRED

phillips head screwdriver

(not included)

(We recommend the use of hand tools instead of power tools)

allen wrench

(included)

2 - metal
dowels

COMPONENTS

1 - seat back

1 - crossbar

1 - seat

2 - leg frames

(1 left, 1 right)

right leg
frame

crossbar

1 Fit crossbar into right leg frame as shown. Secure
crossbar to right leg frame with 1 medium bolt using
an allen wrench. Do not over tighten bolt.

Made in Indonesia - r02 Page 1 of 2

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

MENDOCINO BENCH

A

right leg
frame

E

seat back

A

B

A

seat frame

2 A) Fit 1 metal dowel into right leg frame
as shown.
B) Fit metal dowel of right leg frame into
corresponding hole of seat frame. Secure seat
frame with 1 medium bolt as shown.

NOTE: Do not over
tighten the screw

D

B

C

C

left leg
frame

3 A) Fit seat back into assembled unit. Secure seat back to right
leg frame with 1 small bolt using an allen wrench.
B) Insert 1 metal dowel into seat frame as shown.
C) Fit metal dowel and crossbar into corresponding holes of left
leg frame. Secure left leg frame with 2 medium bolts as shown.
D) Secure seat back to left leg frame with 1 small bolt.
E) Cover all exposed bolts with wood plugs.

4 A) With the assistance of another adult, carefully place
assembled unit onto its side as shown. Secure seat frame with 3
large bolts using an allen wrench.
B) Secure seat frame with 1 screw as shown, using a phillips head
screwdriver. Do not over tighten the screw. Position unit upright.
Assembly is now complete.

A

seat frame

B

Made in Indonesia - r02

B

seat back

CLEANING AND CARE

Clean surfaces with a dry or damp soft cloth. Do not use abrasive
cleaners. Periodically tighten bolts as necessary.

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

Page 2 of 2