Crate & Barrel Mendocino Backless Bench Assembly Instruction

MENDOCINO BACKLESS BENCH

HARDWARE

4 - washers 4 - nuts

TOOLS REQUIRED

hex wrench (included)

Missing hardware? Please call

800.606.6387 for replacements.

Thank you for purchasing the Mendocino Backless
Bench. This page lists all the contents included in the
box. Please take time to identify the hardware as well
as the individual components of this product. As you
unpack and prepare for assembly, place the contents
on a carpeted or padded area to protect them from
damage.

Note: 2 people are required to safely assemble this product.

ASSEMBLY

1 With the assistance of another adult, carefully
place benchtop onto a clean, padded surface.
Attached 4 legs to benchtop as shown. Secure
each leg to benchtop with 1 washer and 1 nut,
using a hex wrench. Do not over tighten the
nuts. Place assembled unit upright.
Assembly is now complete.

washer

nut

NOTE: Do not over
tighten the nuts

COMPONENTS

1 - benchtop

4 - legs

leg

benchtop

CLEANING AND CARE

Made in Indonesia - r02 Page 1 of 1

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners.
Periodically tighten bolts as necessary.