Crate & Barrel Mendocino Arm Chair Assembly Instruction

MENDOCINO ARMCHAIR

HARDWARE

Thank you for purchasing the Mendocino Armchair.
This page lists all the contents included in the box.
Please take time to identify the hardware as well as the
individual components of this product. As you unpack
and prepare for assembly, place the contents on a
carpeted or padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

COMPONENTS

2 - large
bolts

6 - wood
plugs

4 - medium
bolts

Missing hardware? Please call

800.606.6387 for replacements.

TOOLS REQUIRED

allen wrench (included)

2 - small
bolts

NOTE: Do not over
tighten the bolt

2 - metal
dowels

right leg

1 - seat

2 - leg frames

(1 left, 1 right)

Made in Indonesia - r02 Page 1 of 2

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

1 - seat back

1 - crossbar

crossbar

1 Fit crossbar into right leg frame as shown. Secure
crossbar to right leg frame with 1 medium bolt using
an allen wrench. Do not over tighten bolt.

frame

MENDOCINO ARMCHAIR

A

right leg
frame

B

A

seat frame

2 A) Fit 1 metal dowel into right leg
frame as shown.
B) Fit metal dowel of right leg frame into
corresponding hole of seat frame. Secure
seat frame with 1 medium bolt as shown.

seat back

E

A

D

B

C

C

left leg
frame

3 A) Fit seat back into assembled unit. Secure seat back to right
leg frame with 1 small bolt using an allen wrench.
B) Insert 1 metal dowel into seat frame as shown.
C) Fit metal dowel and crossbar into corresponding holes of left
leg frame. Secure left leg frame with 2 medium bolts as shown.
D) Secure seat back to left leg frame with 1 small bolt.
E) Cover all exposed bolts with wood plugs.

seat back

seat frame

4 With the assistance of another adult, carefully place
assembled unit onto its side as shown. Secure seat

back to seat frame with 2 large bolts using an allen
wrench. Position unit upright.

Assembly is now complete.

Made in Indonesia - r02

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

CLEANING AND CARE

Clean surfaces with a dry or damp soft cloth.
Do not use abrasive cleaners. Periodically
tighten bolts as necessary.

Page 2 of 2