Crate & Barrel Matrix Revolving Floor Mirror Assembly Instruction

MATRIX REVOLVING FLOOR MIRROR

HARDWARE

Thank you for purchasing the Matrix Revolving Floor
Mirror. This page

Please take the time to identify the hardware as well as the
individual components
prepare for assembly, place the contents on a carpeted or
padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

lists all the contents included in the box.

to this product. As you unpack and

2 - screws

Missing hardware?
Please call 800.606.6387 for replacements.

1 - back
pin

1 - revolving
pin

TOOLS REQUIRED

allen wrench (included)

COMPONENTS

1 - mirror

1 - stand

BA

revolving
pin

stand

screws

1 A) Insert 2 screws into stand using an allen wrench.
Secure screws through stand and into holes of revolving
pin as shown.
B) Insert revolving pin of stand into corresponding hole of
mirror as shown.

Made in Taiwan - r03 Page 1 of 1

Customer Service 800.967.6696 | www.crateandbarrel.com

mirror

stand

2 Insert 1 back pin into back of assembled unit as
shown.
Assembly is now complete.

CLEANING AND CARE

Clean surfaces with a dry or damp soft cloth.
Do not use abrasive cleaners.