MADISON WINE TOWER
HARDWARE
Thank you for purchasing the Madison Wine Tower.
This page lists all the contents included in the box.
Please take time to identify the hardware as well as the
individual components of this product. As you unpack
and prepare for assembly, place the contents on a
carpeted or padded area to protect them from damage.
Note: 2 people are required to safely assemble this product.
COMPONENTS
12 - bolts
1 - drawer
pull
Missing hardware? Please call
800.606.6387 for replacements.
12 - spring
washers
2 - pull
screws
TOOLS REQUIRED
Allen wrench (included)
12 - flat
washers
2 - drawer
stops
NOTE: Make sure that the sticker
labeled, “BOTTOM,” on horizontal
shelf panels face the same direction.
2 - side panels
5 - horizontal shelf
panels
2 - vertical shelf
panels
1 - back panel
Made in China r02 Page 1 of 3
(1 - top, 1 - middle, 1 - bottom)
(1 - left, 1- right)
1 - drawer
1 - top panel
1 Slide notches on horizontal and vertical shelf panels
3 - shelves
Customer Service 800.967.6696 | www.crateandbarrel.com
together to create the wine bottle dividers as shown. When
assembling shelf panels, make sure that the sticker labeled,
“BOTTOM,” faces the same direction.
horizontal
shelf panels
vertical
shelf panels
MADISON WINE TOWER
top shelf
Make sure drawer glide
B
A
2 A) Place left side panel onto padded surface.
Attach middle and bottom shelves onto side panels
with 2 bolts, 2 spring washers, and 2 bolts per shelf.
Secure with an Allen wrench, but do not over tighten.
Make sure drawer glide on middle panel runs
perpendicular to side panel as shown.
B) Slide top shelf into grooves on left side panel as
shown.
on middle panel runs
perpendicular to side
panel.
bottom shelf
NOTE: Do not over
tighten the bolts.
A
3 Insert back panel into long groove on back leg of
side panel as shown.
B
A
B
5 A) Fit right side panel onto assembled unit as
4 Insert assembled wine dividers into assembled unit
as shown. Make sure the sticker labeled, “BOTTOM,”
faces downwards and towards the back of unit.
Made in China r02 Page 2 of 3
Customer Service 800.967.6696 | www.crateandbarrel.com
shown.
B) Secure shelf panels with 2 bolts, 2 spring
washers, and 2 flat washers per shelf. Fully tighten
bolts using an Allen wrench.
MADISON WINE TOWER
6 With the assistance of another adult, position unit
upright. Attach top panel onto unit as shown with 4
bolts, 4 spring washers, and 4 flat washers as
shown. Secure with an Allen wrench.
B
A
A
B
7 A) Loosely insert 2 drawer stops into drawer as
shown.
B) Attach drawer pull onto drawer with 2 pull
screws. Secure with Phillips head screwdriver but
do not over tighten.
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth.
Do not use abrasive cleaners. Do not use
furniture wax or polish as the wood is finished
with a protective clear lacquer.
8 Insert drawer into assembled unit as shown,
aligning groove on drawer side into metal rail of case
glides. Press drawer stops firmly to secure after
drawer is inserted into unit.
Assembly is now complete.
Made in China r02 Page 3 of 3
Customer Service 800.967.6696 | www.crateandbarrel.com
Loading...