Page 1
MADISON CABINET
Thank you for purchasing the Madison Cabinet. This
page lists all the contents included in the box. Please
take time to identify the hardware as well as the individual
components of this product. As you unpack and prepare
for assembly, place the contents on a carpeted or
padded area to protect them from damage.
Note: 2 people are required to safely assemble this product.
HARDWARE PACK 1
12 - small
wood
dowels
20 - nails 8 - hinge
12 - shelf
pins
8 - support
wedges
Missing hardware? Please call
800.606.6387 for replacements.
4 - shelf
cams
8 - bumpers 8 - hinges
4 - shelf
screws
8 - connecting
bolts
plates
HARDWARE PACK 2
16 - large
wood
dowels
8 - cams 8 - cam
screws
8 - small
screws
8 - large
screws
HARDWARE PACK 3 HARDWARE PACK 4
4 - pulls
1 - cabinet
screw
2 - flat
washers
1 - wall
anchor strap
24 - small
screws
4 - glides
COMPONENTS
2 - side panels
(1 left, 1 right)
2 - back
panels
1 - panel
connector
1 - top panel 3 - adjustable
shelves
1 - bottom
panel
2 - short
aprons
2 - door frames
2 - long
aprons
1 - fixed shelf
2 - door fronts
4 - legs
TOOLS REQUIRED
phillips head
allen wrench
hammer
screwdriver
Made in Denmark - r06 Page 1 of 6
Customer Service 800.967.6696 | www.crateandbarrel.com
Page 2
MADISON CABINET
NOTE: Make sure
arrows on each cam
point towards nearest
edge with holes
A
long
B
apron
leg
glide
B
leg
A
long
apron
1 A) Insert 2 cam screws into 4 legs as shown. Secure
cam screws with a phillips head screwdriver.
B) Insert 2 cams and 4 large wood dowels into 2 long
aprons as shown. Make sure arrows on each cam point
towards nearest edge with holes.
short
A
apron
short
B
apron
leg
assembly
2 A) Fit dowels of long aprons into corresponding holes of
legs as shown. With a screwdriver, turn cams clockwise until
they securely engage each cam screw.
B) Gently tap 4 glides into leg assembly with a hammer as
shown.
NOTE: Make sure
open end of each cam
is towards nearest
panel edge
A
fixed
shelf
C
B
left and
right side
panels
3 A) Insert 2 cams and 4 large wood dowels into 2
short aprons as shown.
B) Fit dowels of short aprons into corresponding
holes of leg assembly as shown. Secure 4 cams. Set
leg assembly aside until further instructions.
Made in Denmark - r06 Page 2 of 6
Customer Service 800.967.6696 | www.crateandbarrel.com
4 A) Insert 4 shelf cams into fixed shelf as shown. Make sure
open end of each cam is towards nearest panel edge.
B) Insert 2 shelf screws and 6 small wood dowels into left and
right side panels as shown. Secure cam screws with a screwdriver.
C) Attach 4 hinge plates to left and right side panels as shown.
With a screwdriver, secure hinge plates with pre-attached bolts.
Page 3
MADISON CABINET
right side
panel
fixed
shelf
left side
panel
5 Fit shelf screws of left and right side panels into
corresponding shelf cams of fixed shelf as shown. With
a screwdriver, turn pre-attached bolts of shelf cams
clockwise until each cam screw is secure.
back
B
panel
connector
panel
bottom
panel
6 Fit dowels of assembled unit into corresponding
holes of bottom panel as shown. Attach bottom panel
with 4 connecting bolts as shown. Secure bolts with
an allen wrench.
top
panel
leg
A
assembly
7 A) Fit dowels of assembled unit into corresponding holes
of leg assembly as shown. Attach leg assembly to
assembled unit with 8 large screws as shown. Secure bolts
with a screwdriver.
B) Slide back panels and panel connector into grooves of
left and right side panels as shown.
Made in Denmark - r06 Page 3 of 6
Customer Service 800.967.6696 | www.crateandbarrel.com
8 Fit dowels of assembled unit into corresponding holes of
top panel as shown. Attach top panel to assembled unit
with 4 connecting bolts as shown.
Page 4
MADISON CABINET
NOTE: Hardware pack includes
20 nails. Securing back panel
with more than 9 nails is optional.
A
A
A
door
frame
90º
C
B
NOTE: Make sure
corners of assembled
unit are 90º square
9 A) With the assistance of another adult, carefully position unit
upright. Make sure corners of assembled unit are 90º square
before inserting 9 nails along groove of back panel as shown.
Secure nails with a hammer.
B) Attach 8 support wedges to assembled unit with 1 small
screw per wedge as shown. Secure screws with a screwdriver.
B
A
B
B
door
front
10 A) Attach 2 hinges to each door frame with 2 small
screws per hinge as shown. Secure screws with a screwdriver.
B) Attach 2 hinges to each door front with 2 small screws
per hinge as shown.
C) Adhere 8 bumpers to corners of 2 door frames and 2 door
fronts as shown.
B
B
A
A
B
A
NOTE: Please refer
to diagram for
hinge adjustment.
11 A) Attach hinges of 2 door fronts to hinge plates of
assembled unit as shown.
B) Attach pull to each door front with 2 small screws per pull
as shown. Secure screws with a screwdriver.
Made in Denmark - r06 Page 4 of 6
Customer Service 800.967.6696 | www.crateandbarrel.com
12 A) Attach hinges of 2 door frames to hinge plates of
assembled unit as shown.
B) Attach pull to each door frame with 2 small screws per
pull as shown. Secure screws with a screwdriver.
NOTE: Please refer
to diagram for
hinge adjustment.
Page 5
MADISON CABINET
A
A
B
adjustable
shelves
13 A) Insert 12 shelf pins at desired shelf heights as
shown.
B) Place 3 adjustable shelves into assembled unit. Make
sure each shelf is securely supported by shelf pins.
Assembly is now complete.
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. Do not use furniture wax or polish as the
wood is finished with a protective clear lacquer.
HINGE ADJUSTMENT
If the doors do not appear square or aligned, loosen or tighten the
appropriate screws on each case hinge as illustrated.
1) Side to side adjustment:
Loosen screw A, adjust gap
with screw B and re-tighten
screw A.
C
3) Height adjustment:
Loosen screw C, adjust
door height and retighten screw C.
A
B
1
C
3
A
2) Depth adjustment:
B
2
Loosen screw A, push hinge arm
forwards or backwards, re-tighten
screw A and secure screw B with
a 1/4 turn clockwise.
Made in Denmark - r06 Page 5 of 6
Customer Service 800.967.6696 | www.crateandbarrel.com
Page 6
MADISON CABINET
SIDE VIEW
flat
washer
cabinet
screw
NOTE: Insert screws 3/4"-1"
from the edge of the strap
wall
strap
wall screw
appropriate
to wall type
flat
washer
wall
wall anchor
appropriate
to wall type
WALL MOUNTING ASSEMBLY
For added safety and stability, it is recommended
that the wall mounting hardware be installed. For
safe mounting, it is essential to use wall anchors
made for your wall type (i.e. plaster, drywall,
concrete, etc.). Mount to wood studs whenever
possible.
The included hardware is used for attaching wall
strap to unit only. You will need to purchase the
appropriate screw and anchor for your wall type.
NOTE: If you are unsure about your wall type or
what mounting method you should use, consult
a qualified professional or your local hardware
store.
Made in Denmark - r06 Page 6 of 6
Customer Service 800.967.6696 | www.crateandbarrel.com
A. Drill a hole in the wall slightly smaller
than the diameter of the wall anchor (not
included). Lightly tap with a hammer until
the face is flush with the wall.
B. Insert 1 wall screw (not included) and 1
flat washer through wall strap and into
the wall anchor.
C. Insert 1 cabinet screw and 1 flat
washer through wall anchor strap and into
the top of unit.
Loading...