Crate & Barrel Lyric Cafe Table Assembly Instruction

LYRIC CAFÉ TABLE

HARDWARE

Thank you for purchasing the Lyric Café Table. This
page lists all the contents included in the box. Please
take time to identify the hardware as well as the
individual components of this product. As you unpack
and prepare for assembly, place the contents on a
carpeted or padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

COMPONENTS

4 - barrel
nuts

9 - flat
washers

Missing hardware? Please call

800.606.6387 for replacements.

TOOLS REQUIRED

phillips head screwdriver

flat head screwdriver

allen wrench (included)

4 - barrel
screws

8 - large
bolts

9 - spring
washers

1 - small
bolt

1 - top crossbar

1 - bottom crossbar

A

B

Align hole on each
barrel nut with nearest
hole on edge of
crossbar

4 - legs

1 A) Fit top crossbar onto bottom crossbar as
shown. Secure crossbars with 1 small bolt, 1 spring
washer, and 1 flat washer using an allen wrench.
B) Remove small screws from each barrel nut and set
aside.Insert 4 barrel nuts into crossbar assembly as

1 - tabletop

Made in China - r02 Page 1 of 2

Customer Service 800.967.6696 | www.crateandbarrel.com

shown. With a flat head screwdriver, align hole on
each barrel nut with nearest hole on edge of crossbar
assembly.

LYRIC CAFÉ TABLE

2 Insert 1 barrel screw into each leg as shown.
Secure screws with a phillips head screwdriver.

3 With the assistance of another adult, carefully place
tabletop upside side down onto a clean, padded
surface. Insert 4 legs into tabletop as shown. Very
loosely attach each leg with 2 bolts, 2 spring wash-

ers, and 2 flat washers.

CLEANING AND CARE

Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. Do not use furniture wax or polish as the
wood is finished with a protective clear lacquer.

4 Fit holes of crossbar assembly into barrel screws of
each leg assembly as shown. Make sure each barrel nut
is aligned vertically with barrel screw. Secure crossbar
with 4 screws from step 1B using a screwdriver.
Tighten the 8 leg bolts securely. With the assistance of
another adult, position unit upright.
Assembly is now complete.

Made in China - r02 Page 2 of 2

Customer Service 800.967.6696 | www.crateandbarrel.com